What are the error codes for Charlie

[Pyotr]

Is there a list of on-screen error codes and their meanings posted somewhere? If not could the mods do a sticky please.Thanks

[licksister]

Error message 002 "The satellite signal has been lost, signal acquisition is in progress."
Problem: No signal being recieved. Could be that Sat moved, bad weather, New spot beam has removed signal from your area, bad cable connections, Bad switch

Error message 005 "Your smart card does not currently have authorization to view or purchase this program. Please wait or channel up or down."
Problem: Just wait, its gotta get the new decrypt keys

Error message 015 "Acquiring satallite signal."
Problem: Self explanitory

Error message 019 "The smart card is not inserted correctly."
Problem: Either cam looped, in IRD wrong, or making bad contact

Error message 020 "The card you have inserted is not valid for use in this receiver."
Problem: Wrong ird number put on card

Error message 021 "Please insert your smart card."
Problem: Put smart card in. If your cards in you have a hardware problem

Error message 022 "Your receiver has not yet been authorized."
Problem: Your IRD # and boxkeys are 00'd out or wrong or you ird status byte is set at 80 (Suspended) needs to be set at 09 (normal)

Error message 023 "Unable to aquire program guide information."
Problem: No satallite signal

Error message 150 "A SERIOUS PROBLEM HAS BEEN DETECTED WITH YOUR RECIEVER:
PLEASE CALL 1-800-334-7496."
Problem: EEPROM Lock Nags (Self explanitory) DO NOT CALL

Error message 151 "A SERIOUS PROBLEM HAS BEEN DETECTED WITH YOUR RECIEVER:
PLEASE CALL 1-800-334-7496."
[I]Problem: Usually do to a bad lock installation or the old lock installation, turn off IRD and unplug. Check wire lengths & lock installation. DO NOT CALL

Error message 152 "A SERIOUS PROBLEM HAS BEEN DETECTED WITH YOUR RECIEVER:
PLEASE CALL 1-800-334-7496."
Problem: You have been hit by an ECM targeting the EEPROM, turn off IRD and unplug. Check the forums & files section for info on how to correct before doing anything. DO NOT CALL

Error message 153 "A SERIOUS PROBLEM HAS BEEN DETECTED WITH YOUR RECIEVER:
PLEASE CALL 1-800-334-7496."
Problem: You have been hit by an ECM targeting the TSOP, turn off IRD and unplug. Check the forums & files section for info on how to correct before doing anything. DO NOT CALL

Error message 155 "A SERIOUS PROBLEM HAS BEEN DETECTED WITH YOUR RECIEVER:
PLEASE CALL 1-800-334-7496."
Problem: TSOP Lock Nags (Self explanitory) DO NOT CALL

Error message 349 "You are attempting to use a version of smartcard that is incompatible with this receiver."
Problem: Self explanitory...IRD firmware is anti Rom2/Rom3/Rom10...Try Vidmod or the 301.013 1 Anti- Rom2/3/10 Fix

[Pyotr]

Very nice.Thanks