Help please !!!!

[northern_spirit]

301-010 DN
receiver on Jtags read all
now cant power up
wher did I go wrong ???

Jtaged the rec...
went to flash edit but must have blinked and erassed all
plugged in rec...no power /no light jtags dont recognize IRD
can't get anything...need help desparately.

is IRD DEAD??

[BirdieMod]

Erased to flash 1 with the receivers bootstrap prob. You will need to reflash the tsop.
Be patient, This can be very hard and time consuming, But can be done in slow mode. ABout 6 hours for a full reflash.

[northern_spirit]

Thanks so much for the help.
luckily I have a back up of flash and eeprom
I dnlded wall2 with read me file so I,m going to give it a try:)

[Chapster99]

You should be able to program the first 60000 bytes of flash2 using wall2. By doing this, you won't be stuck in the slow programming mode. If successful, then open Jkeys2.99. Flash Programming, erase flash1 (full) 3-4 times. Then program your back up flash1 bin. Then erase flash2 (full) 3-4 times. Then program flash2. Then program the eeprom. Should be good to go.