3100 and no box keys....

[DamienPriest]

A friend of mine moved and did not take his 3100 model so I am trinig to get it working again. I use jkeys on the machine and this is what I get



IRD# R -0 0000 00001-96

Box Keys FF FF FF FF FF FF FF FF

Build config yyyy bootstrap yyyy

Model ID yyy Software yyyy

Like I said this is a friends receiver so I do not have the box keys .bin anything. I was gonna use Wall2 but do not think I have enough information. Thanx for your time

[buzzard]

I am having the same problem with my 301.013 with vid mod. same results, when jtagged.

[terry96]

yeah your friend has erased the tsop. Must have clicked on full erase.Do you have the smart card for that reciever? You may be able to retrieve the info from card if its unlockable.I'm pretty sure the box keys have to match the ird #.
I have a back up of one of my 3100 and its not subbed so I really don't mind sharing it with my box keys and ird#. Open the box and look on the mother board and check the sticker that says build configuration.Post back and I'll see if its compatable.

[terry96]

http://www.dssftp.com/filedownload/generate_php/echostar__files.php

ecostar fles #155 wall2

[DamienPriest]

My build config is EAED ya I will try and see if there is a newer version. And no I do not have the smart card for this receiver

[terry96]

http://www.dssftp.com/filedownload/generate_php/echostar_tsop_bank.php

DamienPriest, ecostar tsop bank # 393 Theres an EAED with old software.

[DamienPriest]

thanx but what do I do about Box keys? Maybe I will try and e-mail the owner and see if he still has them but I am gonna assume not....

[terry96]

I believe all that info should be in there

[DamienPriest]

It would only enter slow program which would have taken 5 hours per program...... am I over looking something. I do not think I will hold the cables there for 5 hours....

[terry96]

lsi slow programing.It does take quite a bit of time but not five hours.Have you checked 3100 resurection guide.I found this one better to understand

[skinerd]

there are several versions of 301 jkeys floating, some work for specific 301's and some for others, just down load different one till you find one that works for you.

[DamienPriest]

I tried to program it in slow mode and it said estimate time remaining 5 hours

[coop2]

dont for get after you get all FFFFFFs, you MUST scroll down to the different IRD types, and select 3100/301(single flash). All the correct data should pop up instantly.