Panasat 2500A Setup

[Spoiler]

Hi,
I used have dave and still have his 18" dish on the roof. I just got a Panasat 2500A and was trying to set it up. I made no changes to the dish on the roof so I think it is still pointing to 101. I wanted to see if I could at least get one channel before I tried to flash it and move it to 110.

My problem is that I don't know what to pick when I get to the setup screen about the LNB stuff. Or even if the one I have from dave will work.

Does anyone know where I can get some information on this part of the setup?

Thanks!

Spoiler

[xwolfs7]

Hi! you won`t get anything at 101w there is a bird there besides DTV but it`s Ku band. But to set up your receiver lnb set up goes like this;
flash with up to date flash right now it`s X8500 then set up as follows

LNB set to "standard"
LNB frequency "set to 11250"
22khz"set to off"
disqc if you have multi dish example;"#1/110 #2/119
LNB power "ON"
change FTA to ON
exit then go to parental control in menu put password in twice turn key function on then exit watch tv.

[xwolfs7]

Hi! When you go into antenna setup and choose the sat you want that`s where you will see LNB power settings it will be on the right side 4th or 5th one.
just use your arrow button to change it.

[Cappy]

HI,
My pansit 2500a doesn't have the feature LNB "on" or the FTA "on"
I can set the FTA to all or fta.

Is my firmware older then yours?


This is what I found .... hope it will help out others .....