Report Exact Testing Parameters If You Got Hit Here!!!

[mili]

DishNet took loggers out withthe new 52 command (crashing loggers) and then sent their ECM down so we were in the dark from that point on. I need to ask you post an answer to each of these questions below:

ROM Type?: (ROM2,3 or 10)
PPV String and what were they?: (ANY or NONE or Unsure)
Blocker Type?: (Penga, mili's PB etc...)
Receiver Model?: (2700 etc...)
Softlock Present?: (Yes or No)
Spending Limits on the PPV: ($30 or $x or I don't know)

Please do not rant, copy and paste this into your reply and enter only the answers so we don't have to wade through crap to get to the important data

mili

[lowdog]

ROM Type?: 10 (2), 3
PPV String and what were they?: custom, ppv, porn, spec events
Blocker Type?: 2 public - wd101, 1 mili
Receiver Model?: 2700
Softlock Present?: No
Spending Limits on the PPV: 12.99

[iDEN]

Atmega128 @ 18Mhz (Rom3@rev 372)



PPV String was OLD, from March or April. (I'm dish300 only and it's been running the avl ppv channels on the 119 wide open for months.)

!add 0B2201013000727401000899183E19930200017EFF80000075 30000088B80000183E0001;ppv low string

!add 0B 22 01011001683301000899187B18DB0200017EFF80000167A200 016CF20000187B0001 ;Custom EVENT String



Atmega, so no bloker.
IRD is 301.13 single 4MB
No Softlock
Unsure of Spending Limits if any.

P.S. Reprogrammed Atmega leaving out PPV string and have been up & running fine since. (Approx 7 hrs and counting)

[chep]

ROM Type: (ROM3 (3) or ROM10(5)
PPV String and what were they: (2 with and 6 without)
!add 0B2201015000BFA00100089918EA19480200017EFF800000BF 1A0000C1B2000018EA0001
Blocker Type: (GCSB2.5.1)
Receiver Model (2800,3900,4700,301.010,301.013)
Softlock Present?: ( No) No Digital lock either
Spending Limits on the PPV: (Default from RTM?)

[sukh77]

ROM Type?: 3 & 10
PPV String and what were they?: lo 45000-59000 hi 92000-96000
Blocker Type?: Nomore64 locking type on rom3 and WD101 on rom10
Receiver Model?: 510 with rom3 and 301.13 with rom10
Softlock Present?: ( No)
Spending Limits on the PPV: (I don't know)

I have another 510 running the same thing as rom3 above it is still working ok. On this card the PPV lo was 45000-55000. It might be better to do the 3 ppv id's like 001438 has posted in how to create tiers sticky. 1 for porn, 1 for movies, and 1 for events. Unless someone had this setup with 3 strings and went down.

[Chief]

ROM Type?: 3, 10, replaced 10 with MC
PPV String and what were they?: Default string included in tier list sent with Mili PB program (rom 10 on 301.013), homemade tier list using TierGen, PPV range 48832 through 49696 (501PVR), default string on MC
Blocker Type?: Mili PB, both plastic
Receiver Model?: 501PVR, 301.013 Dual
Softlock Present?: No, both - digital lock, 501
Spending Limits on the PPV: Unknown

Digital Lock on 501 saved a TSOP rewrite, but the unit DID get hit.

[patricig]

ROM Type?: (ROM2,3 or 10) = 3
PPV String and what were they?: (ANY or NONE or Unsure) = MILI'S PPV PATCH
Blocker Type?: (Penga, mili's PB etc...) MILI'S PB
Receiver Model?: (2700 etc...) 301-3100
Softlock Present?: (Yes or No) ????????
Spending Limits on the PPV: ($30 or $x or I don't know) MILI's PPV PATCH


Anything you can do to fix would be appreciated. Thanks as usual.

[sukh77]

Chief those are pretty tight ppv strings did it go down. That's pretty amazing if it did. Im running wider than that and didn't get affected on one card.

[kris329]

After Hit Flash was performed, and everything
seems to be ok expect
for different backgrounds on Menu.

[juanjimenezjuan]

ROM Type?: None- cemu 72c2a @ 381; atmega128 18mhz @ 383
PPV String and what were they?: Default string included in tier list from Pharmarz just added locals
Blocker Type?: n/a
Receiver Model?: 301.010, 301.013 single
Softlock Present?: No, no locks on either, but have built in jtags (013 w/ VID)
Spending Limits on the PPV: Unknown

CEMU paused and then went card not inserted properly. Rebooted system, and it has been working since 3pm central w/ 301.010

Atmega on 301.013 went location 00000001. Did a quick erase to sa49 and reinserted atmega untouched. It went down immediately. Reflashed tsop, and reprogrammed atmega w/ the exact same thing and have been up since.

Cemu on the 301.010 was on all day and only flinched once. Beats me, but I love the fact that I can some here and get advice from some very intelligent people.

Thanks

[mopar611]

Rom type: Magic card-camless rom3
PPV string and what where they? Default-Milis PPV string
Blocker type: None
Receiver type: 3700
Softlock present? No, AR105B
Spending limits: Unkown

I have had no problems here! Thanks for the MC Mili. :cool:

[boaterbub]

ROM Type?: 10 (1), 3 (3)
PPV String and what were they?: custom, ppv, porn, spec events
Blocker Type?: wd101, penga_nomore64v6
Receiver Model?: 2700 (3), 301.013 (1)
Softlock Present?: No
Spending Limits on the PPV: $30.00

[Dude]

ROM Type?: ROM 10
PPV String and what were they?: Custom PPV and Events
0101100167A10200089918B4198F0200017EFF800000A41000 017318000018B49909
010110007D480100089918B4198F0200017EFF800000AA7B00 00AC5E000018B49909
Blocker Type?: BirdA23v1
Receiver Model?: 301.13
Softlock Present?: No
Spending Limits on the PPV: $50

[JT]

For me the list of what got hit yesterday is pretty long. (it included my 19" monitor and my linksys twin port hub as well as a 7100) At any rate, the one unit of the eight I manage that DID NOT get hit was a 2700 with dlock3 from Mili running a rom10, Mili's PB4.0 and NO PPV string at all.

[68harley]

ROM Type?: rom10 x2
PPV String and what were they?: !ADD 0B 22 010110007D480100089918B4198F0200017EFF800000B3B100 00B491000018B49909 ; Unknown Type 0B
!ADD 0B 22 010130016A450100089918D318FF0200017EFF80000168A500 016A4E010318D30001 ; Unknown Type 0B

Blocker Type?: tenares rev A23
Receiver Model?: 310.010 x2
Softlock Present?: no locks
Spending Limits on the PPV: 8.99 i think

ok heres the wierd thing one got hit, and lost about half of all channels when i erased ecm on memmory, the other was not hit, did not lose any channels just hi/lows were changed so i don't know if the missing channels are missing because of the reciever, or if tiers changed on one card, but not the other, the programing is identical on both cards, is there a new tier list? or should i read one card, and copy image to the other?

update, i just had to do a check switch, no channel loss on the ecm'ed unit

[vdealer]

Hey guys, sorry if i posted this in the wrong thread, but this is a c&p from another site that supposedly had the log of the emm. Hope this is helpful

If any one is interested..........

Here's a breakdown of the EMM code. There were two of them.
They were in the stream twice...they are NOT in the stream right now. Doesn't mean they won't return. Your cards, with the PPV strings on them, will more than likely work again...but if these EMM's are reintroduced, they're going right back down. Don't have a permanent solution yet...way too early.

Here are the two 7/20 EMM's.
DECRYPTED EMM: [KNOWN: Rom 3 Embedded $64 CMD ECM July 20 2004]
--------------------------------------------------------

SIGNATURE: OK!


3F -> Filter: ANY CARD
0001 PROVIDER ID (Dish (USA))

F3 -> RUN CODE FOR ROM3:
A6015F52260181C6 0097AA20C70097A6 179CCC5B19814402 0102000000000000
0000000000000000 0000000000000000 0000000000000000 00000000

DISASSEMBLY OF CODE:
------------------------------

0081: A6 01 lda #$01 ; Load in A
0083: 5F clrx ; x <-- 0
0084: 52
0085: 26 01 bne $88 ; Branch if <>
0087: 81 rts ; Return from subroutine

0088: C6 00 97 lda $97 ; Load in A
008B: AA 20 ora #$20 ; A= A or ...
008D: C7 00 97 sta $97 ; Store A in...
0090: A6 17 lda #$17 ; Load in A
0092: 9C rsp ; Restore stack pointer
0093: CC 5B 19 jmp EMMBYTESLEFT_PTR_A; Continue processing EMM commands in
$80+A


BYTES DUMP:
---------------------
0096: 81 44 02 01 02 00 00 00
009E: 00 00 00 00 00 00 00 00
00A6: 00 00 00 00 00 00 00 00
00AE: 00 00 00 00 00 00 00 00
00B6: 00 00 00 00 00 00 00

and...

DECRYPTED EMM: [KNOWN: Rom 3 Embedded $64 CMD ECM July 20 2004]
--------------------------------------------------------
SIGNATURE: BAD(C35A19EFC8015A25)
DECRYPTED BAD DATA: 00CB455F3D9B31591EE3787C43DB3CD7A37504FF9B827E0AA3

23B3840417043B36F0EBD39E34DE420700B99CB7F9F85F5EF6

84A2AB624AD20FDB6463A61C7D6C
-- Trying decrypt with signature exchange...
NEW EMM SIGNATURE: 89489733A8A8A6CD

SIGNATURE: OK!
3F -> Filter: ANY CARD
0001 PROVIDER ID (Dish (USA))

F3 -> RUN CODE FOR ROM3:
A6015F52260181C6 0097AA20C70097A6 179CCC5B19814402 0102000000000000
0000000000000000 0000000000000000 0000000000000000 00000000

DISASSEMBLY OF CODE:
------------------------------

0081: A6 01 lda #$01 ; Load in A
0083: 5F clrx ; x <-- 0
0084: 52
0085: 26 01 bne $88 ; Branch if <>
0087: 81 rts ; Return from subroutine

0088: C6 00 97 lda $97 ; Load in A
008B: AA 20 ora #$20 ; A= A or ...
008D: C7 00 97 sta $97 ; Store A in...
0090: A6 17 lda #$17 ; Load in A
0092: 9C rsp ; Restore stack pointer
0093: CC 5B 19 jmp EMMBYTESLEFT_PTR_A; Continue processing EMM commands in
$80+A


BYTES DUMP:
---------------------
0096: 81 44 02 01 02 00 00 00
009E: 00 00 00 00 00 00 00 00
00A6: 00 00 00 00 00 00 00 00
00AE: 00 00 00 00 00 00 00 00
00B6: 00 00 00 00 00 00 00

[johnny456]

2 receivers 1 3900 1 2700
both hit
rom 10's
wd101 blockers

3900 card still at 21 ok to reprogram after fix tsop

2700 card locked at 23 cannot get into card, bad password, redo tsop all working except card locked cannot get into now but all works with programming that was on it.

not sure when 2700 card was locked since I have not reprogramed it for about 4 weeks

did redo 3900 card last week

Lost one card in a 2700 and not one in a 3900 with identical programming on both

GOODLUCK EVERYONE Lets figure this thing out!

[JoeSixpack]

ROM Type?: (ROM,3 )
PPV String and what were they?: (!ADD 0B 22 0101220031BE0100089918EA1A860200017EFF800000B58200 00C1B2000018EA81C9 )
Blocker Type?: (Penga No 64-7 locking)
Receiver Model?: (2800)
Softlock Present?: ( No)
Spending Limits on the PPV: ( I don't know)

[FreshManDTV]

ROM Type?: ROM2
PPV String and what were they?:
0101220167BF010008991877193E0200017EFF800001679100 017E3300001877023C
0101220094D4020008991877193E0200017EFF800000ABE000 00B79800001877023C
Blocker Type?: NONE
Receiver Model?: 3000
Softlock Present?: NONE
Spending Limits on the PPV: ( I don't know)
**********************************
As you can see, one of the PPV string was out of range but I was lazy to fix it. Anyhow, the reciever wasn't hit (could it be that nobody was using it at the time?). But I am glad It wasn't hit otherwise the 3000 would become a doorstop. Took all the PPV out yesterday and running fine so far.

[jmkonthebox]

ROM Type?: (ROM,3 )
PPV String (RTM PPV+porn)
Blocker Type?: (Nomore 64-7 nolock)
Receiver Model?: (3900)
Softlock Present?: (No)
Spending Limits on the PPV: (8.99)

[chep]

Chep, you said that you had 2 with PPVs and 6 that didn't, but all 8 got hit?? Just trying to make sure.


Yes that is correct! All 8 down but only 2 had PPV Strings on them. All did have the Porno Teirs though! :)


chep

[thepirate]

ROM type: ROM 10
PPV string: Mili,s ppv string c/p into own tier list created w/tiergenR1
blckr. type: blocker 4.0
recv. model: 3900 w/p231 software
soft/hard lock: none but do have JY switch
spending limits: 8.99 I think!!

FYI hit again today around 2:45PM

[Dude]

For the 7-22-04 ECM

ROM Type?: 10
PPV String and what were they?: None
Blocker Type?: TCFT-II
Receiver Model?: 301-013
Softlock Present?: No
Spending Limits on the PPV: None
Locals: Had multiple locals open in my spotbeam and most non-sb locals, tonight will only have my sb-locals

[carlford]

rom2 in 2700 and a 3800 no blocker but just about everything else except porn and ppv's. no problems at all.

carl

[CRASHER]

ROM Type?: (ROM10)
PPV String and what were they?: (2 strings) LID 9471, HID fffe; LID 167660, 17003
Blocker Type?: (Checksum 2.51)
Receiver Model?: (301.013)
Softlock Present?: (No) but have charlie chaser v4
Spending Limits on the PPV: ($2201)

[CRASHER]

Checksum latest update seem to be holding for now, running OK for about 1 hr. now with wide open PPV :D

[kris329]

So if you add the checksum blocker this will prevent the ECM??

[senator]

milli.....both 310's went down with all the others....reflashed with orginial tsop & applyed a subbed Cam ID...both good since 4 hours after ecm...still working

[stomper747]

ROM Type: 10
PPV String: None
Blocker Type: ROM 10 Nomore-64-2
Receive: 2800 & 3900
Softlock: None
PPV Spending Limit: NA

Just running America's 180 and Boston locals.
Came home from a weeks vacation and found it croaked.

[kris329]

301.10
ROM 10
New Cam ID from scammer
NOMORE64-2 Blocker,
P225 update (also upgrade with my permission checked)
No PPV's, PORN, or EVENTS
No Locks
-------------------------------------
ERROR 153 ;-(