My Reciver Is Screwed Help

[extreme915]

:cry: i REALLY SCREWED UP MY RECIEVER. I deleted both the 1fe0000 and the 1fc0000. I cant get my tsop reprogrammed. I get errors. When i hit flash programming i get (LSI control Unavaible).I click ok and then it says (the flash codes returned are not reconized by jkeys. Mfg/Device codesreturned are ffff/ffff (JEDEC) and ffff/ffff (flash file). I erased both tsop a bunch of times. i put new bateries in my jtag. i unplugged my reciever 100 times and i can get it to work!! HELP ME PLEA SE!! :cry:

[skinerd]

301-010 resurrection guide is what you need now......get that and Wall and restore it.

[extreme915]

301-010 resurrection guide is what you need now......get that and Wall and restore it.
can you send it to me?

[newbee.JR.]

if you have mili"s jtag it doesnt need batterys you can ripe that battery thing right off I did and it still works fine ~ but I was getting the same thing when I was trying to reprogram my tsop ~but first have to make sure connection ! did you remember to unplug then plug in cord to reciever before you click (ok)!!

[extreme915]

if you have mili"s jtag it doesnt need batterys you can ripe that battery thing right off I did and it still works fine ~ but I was getting the same thing when I was trying to reprogram my tsop ~but first have to make sure connection ! did you remember to unplug then plug in cord to reciever before you click (ok)!!
nope

[extreme915]

nope
didnt work!! i cant get it

[newbee.JR.]

did you say you erased you tsop ~full chip or what? alot of times if cods are return its becauase not a good connection or theres nothing there

[extreme915]

did you say you erased you tsop ~full chip or what? alot of times if cods are return its becauase not a good connection or theres nothing there
i did a full erase on both tsops

[newbee.JR.]

ok then to start over fresh you will have to reinstall your tsop witch means going to public files up at the top and down load new tsop to jkey or did you save your old one??

[newbee.JR.]

I did the same thing I ment to erase just part of my tsop se5 and I hit the erase on full chip ~and didnt forgot to save the ther one if you have two 301010 you can save one and put on the other ~

[extreme915]

ok then to start over fresh you will have to reinstall your tsop witch means going to public files up at the top and down load new tsop to jkey or did you save your old one??
i only saved the 1st tsop. so i have the public one and i used flash edit and did that. i am ready ,also i have wall 2.0.

[newbee.JR.]

so did you re install your second on all you all better or still have trouble didnot understand in ready~?

[extreme915]

so did you re install your second on all you all better or still have trouble didnot understand in ready~? i cant get it to work with wall eather can you give me step by step

[newbee.JR.]

well first of all get the reciever in front of you try to get best connect you can hit the detect button it will either show some numbers or a box will come up saying noit good connection ok now look at the number becasue you have no tsop you wont see your box key numbers but you will get some numbers so, what I did was dont worry about it hit detect then hit program unplug reciever then plug back in quick!! then hit ok then the erase read and program sign will come up let me know when you get there

[newbee.JR.]

welp buddy im asuming you got it im goin back to tv

[JShin]

If your IRD is still fucked just go to the files section and download the 301/3100 ressurrection guide.

[newbee.JR.]

hes offline jshin he got frustrated~ hey do you know were I can get a sotlock have they been working for the recievers are there diferent ones??