DP 301.013 Jtag sccess

[Rax]

Ok first of all I wanna say thanks to every body that helped me out. Gunthers VID mod guide kicks ass! Thanks gunther :) .
Ok here are some more questions I have. I turn on jkeys dp301.013c and it reads my ird (I wrote down all the important info box keys ect...), then go to flash programing, and read then it wants to save. I push ok. While saving I get an error at 6% when saving "Error reading from memory" , but it still saves it I guess.
Is this bad?

Thanks Rax

[srad750]

yes it is bad. it did not save, you have to be very still. the trick to it is hooking the jtag on the inside of the cutout, that way there will not be any movement. it has to say 100% complete! try again you'll get it!

[Rax]

yes it is bad. it did not save, you have to be very still. the trick to it is hooking the jtag on the inside of the cutout, that way there will not be any movement. it has to say 100% complete! try again you'll get it!

Ok.. but I dont have to hook anything. I for got to mention that I did the jtag thru the phone line. Im going to try it on another computer see if it works then. :cry:

[Rax]

Thanks srad and nickling I got 100% error free and saved. now all i need is to send mili some money. lol

[diablo]

Can anyone tell me the difference between jkeys and jeepers? Is jeepers for atmega only?
I have a 3100.010 converted to dish with atmega, and a 301.013 that just came in the mail. I'd like to try the AVR 6 board that I recently aquired on the .013 either that or MC converted to BEV.
Any suggestions?
I hope I'm asking in the right place.

[thunderlizard]

ive corrupted my flash tryin to jtag help please

[thunderlizard]

ok tryin gunthers didnt read enough