Vision tv

[joshwild]

can someone tell me steps for making a vision tv card work with bell expressvu

[d_o_geezer]

joshwild, you need to let us know which software (dvbdream, my theatre,progdvb,etc.) you're trying to use. There are some really good How-to posts at http://sirius-tv.com/v-web/bulletin/bb/index.php .
Once you get the card installed and the dish pointed, setup is basically the same. You must set up the LNB settings (varies with the lnb you're using, if it's an old 18 inch DTV dish, settings are usually LOF1=11250 SW=0 LOF2=11250) and select the sat you want to receive. Then you scan the transponders and the program will populate the channel list. If you have everything correct, you're watching tv!
To see the encrypted channels, you will need a prog called Yankse and you will need a good softcam.key.
Good luck,,

[joshwild]

I want to run bev. I have a 21ich dish, twin lnb pro, where can i get that program yanksee

[d_o_geezer]

http://www.yankse.com/news.php