Error 153 with Rom 10 pls help

[ghost1412]

I am using 301.10 with Rom 10 using YATM0 0.9M for tiers and nomore64 as blocker and I do have digital lock and I still keep getting hit every 15 to 20 minutes , any idea what could be the problem ? could be the CAM ID ? if yes do u have any working one ? Please help

[Crazy1_79]

Use scammer to generate a new one. I have seen where people are running crazy wide ppv strings and are not getting hit. Make sure your blocker is up to date. If it is a month old then it is not updated from the recent ecm's we took. I would guess it is a cam id problem

[ghost1412]

I am using blocker (nomore64) the latest one downlaod from the file section - no idea if this blocker work with 301.10 or no ? also I did try several Cam ID and still no luck ? do you have any working Cam ID I can try it with ? you can PM me if you want
If this is not the correct blocker what is the latest one should I be using then ??

[dssturbo1]

you can get a private blocker from milli, or might try using GCSB 2.51 working fine for me on rom 3 and 10's change the password tho and rememeber it

[ghost1412]

so her is the steps that I am doing and if you can help me with that will be thankfull

1) I clean up my Rom 10 card do 1 step clean and it go success
2) Rev will be A16 so that very good
3) Apply tiers (YATM0.9m) and test it and apply it with no problem at all
4) Apply the Blocker ( GCSM) Generate check sum blocker V2.51 and I make sure that I did do the update and change the pasword to my own password - apply the patch and test no error detect
5) Then I change my IRD and Box key and make sure that the keys are correct and I did generate CAM ID from scammer
6) When I right to card I get error right to card faild to right to card also the rev is changed to be A23
7) Thanks God I can still go back and Unlcok the card with my password and do 1 step clean and I get it back to Rev A16

so that what I am doing in details do u have any comment ?

[dssturbo1]

always apply the blocker last after that it is good for receiver you cannot program anything after it is applied.
yes, it will spoof your rev to A23 but can get back in with password
general steps...

clean and read your card
make needed ird, cam id, time zone, boxkey changes as needed now
OR if your tier program does this then let it do it when you apply tier patch
use your tier patch and open test and run if no errors next
need to add in the blackout fix patch next (this fixes the parity key change blackout from 8-12)
than apply GCSB 2.51 blocker patch, change password, test run, then do a write to the card........ card should be ready to use now

[Crazy1_79]

yes, like dssturbo said, change your cam id, ird number and box keys before you apply blocker, one you run blocker in nagra, it is pretty much like it is on the card. apply tiers, change your info to what you need. Write that to card. Then test and run blocker and finally write that to card. Be sure to modify password and don't forget it.

[ghost1412]

I will try that and I will update you - hopefull that will work out

[Crazy1_79]

The only rom 10 card number I have is the one that comes with Mili's blocker and I am not at freedom to let anyone else know what it is.

[ghost1412]

ok that fine
do u have any idea how much does it cost the private Blocker ?

[Crazy1_79]

It is 75 dollars for six months support

[ghost1412]

does that cover Rom 10 only ? or Rom3 as well ?

[Crazy1_79]

that is for rom 10's and UNMARKED rom 3's

[ghost1412]

how often does those private Blocker last for from your experience and how fast do u get the update when you get ECM ??

[Crazy1_79]

we got the private blocker update very quickly on the last key change. Other than that, there have been no problems.

[ghost1412]

I did follow the insturction exactly and still get error

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 31 36 4D
ROM Revision: 010
EEPROM Revision: RevA16
ProviderID: 00
CamID: 00 9F 6F 26
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Using BD0 Key: 7E C2 C9 EA B4 8D 0B 31 6C 0B 92 A4 E4 C0 A0 58
Attempting to login to BD3
Attempting to login to BD0
BackDoor login verified
Attempting to login to BD0
Disabling card
Restart in progress
Restart in progress
Writing CodeSpace
Attempting to login to BD3
Writing DataSpace
ProviderID: 00
CamID: 00 9F 6F 26
Attempting to login to BD0
Enabling card
Restart in progress
BackDoor 0 login failed
Writing ROM10 failed
Closing of COM1 was successful

[dknight420]

reboot your computer i have the same problem if i let my computer go into standby mode when i bring it out i have the same problem and x out your cam id