Missing satellite feeds

[TS2003]

I am only getting the odd channels on 110 but both, even and odd on 119. I have 2 separate dishes with legacy lnbs and a 3700 ird with MC
Anybody could tell me what's wrong?

[johnnybeegoods]

You might try posting this question in M.C. section. I personally know little to nothing of the M.C.

[Smurftoon]

What Software Version Is The 3700 At? It's Currently At 7.97.

[TS2003]

I've got version 797 . I guess I'll try with a larger dish, to increase signal strenght and see if this solves the problem. It definitely isn't a MC problem.

[Dave411]

I am only getting the odd channels on 110 but both, even and odd on 119. I have 2 separate dishes with legacy lnbs and a 3700 ird with MC
Anybody could tell me what's wrong?

It could just be a bad lnb. You could try switching lnbs and see if the problem switches, 119 odd only and 110 both. When you do check switch, does it say 110 odd & even, 119 odd & even? If check switch results are 110 odd & X, 119 odd & even, it would seem to be a bad lnb. It also could be bad cable between lnb and switch not allowing the 14 - 18 volt to switch polarity.

[TS2003]

Thanks for your suggestions. It says 110 odd & X,119 odd & even. I'm using a Dave LNB but I'll check with a Dish Legacy one. I could also check the voltage from LNB to switch now that I know the parameters.
I'll keep trying and shall post the results