Help with Hex Workshop

[mo-fo]

I'm trying to fix my eeprom. The ird is a 301-10 (eafd) I went to the tsop bank and file #32 looks like the one I should use:

301-10 tstop eafa p226.zip / 301-10 Tstop EAFA P226 Both flashes U22 and U23

Date of file is 2004/07/16

Searched for some documentation to help me step through this procedure. Found some and it says to get Hex Workshop 3.11. Got that. Got down to step where it says:

"•For the purpose of this tutorial we will be using the box key "E0 67 45 6A 12 35 A9 7E" & a 2700 model tsop bin. (To find the line to edit for your model just use this Jtag Map) "

There is no "jtag map" because the link that helps you get the jtag map is dead. So I need to find out what they mean by jtag map.

So thats my first question: Need a workaround for "jtag map"

Second part of tutorial that is not clear is:

"•Now in the Offset field type in the proper line for your model# (we will use 7FFC0 since thats the proper offset of a 2700 model, refer to the Jtag Map for your model. "

So the second question is: I need to find out the offset for my model#.

thanks

(I incuded the tutorial)

[zeta44]

Make a new eeprom from the TSOP you have with FlashEdit.

[chep]

If you have a read saved from your tsop and you know the Boxkeys.

OPEN Hex Workshop and in the top portion "edit: "find" type in your boxkeys and it will locate them within the tsop flash you are looking at. Then you will know where to look in the future for your specific model.

If you still have a question PM me to remind me and tommorrow I will look at some of my tsops and let you know the exact location in Hex Workshop to find the data you want for your specific IRD. I am not at home right now and do not have access to the info.

chep