Need emu help

[blackdog]

I have a 301:010 ird and a chinamn dos bootdisk someone I know made for me and had ppv till 2 weeks ago when ird updated. Now it wants to dial out and I saw the new threads on that. I need to figure out how to patch and edit disk for this reason and for next ecm. The guy that made me disk said I need to learn how on my own. I have been looking around and reading but cant figure it out. I have nagra and jkeys and know how to use my jtag just don't know how to patch ect........ Any help would be jolly good!!!!!!!!!!

[BiggerBear]

You didn't say if you were running Bev or Dish
You need to find a PPV string on one of the Sat sites.
dsshelper has some posted for DishNet. In Chinaman for both Bev and
Dish the bin gets named "BEV381.bin" so step 1) would be BEV381.bin.
If your are just patching a fix skip steps 6) & 7)
For step 8) insted of .ne3 you look for the PPV patch you found.

1) Have the dish383.bin located so you can open it with NagraEdit.
2) Open NagraEdit - Click file - Open Card Image
3) Open dish383.bin - A window comes up -Card Image Type(Leave At Default)
4) Click OK
5) File Opened : dish383.bin
6) Click Tools - Open Card(remove the checkmark in front of Clean Code Space)
7) Click OK -card image cleaned successfully
8) Click Patch - Open Patch, locate your .ne3 file and Open
9) Test Patch - Bottom of screen you should see no errors detected
10) Run Patch - Patch applied with 0 errors
11) Click File - Save Card Image(name & save)
12) That Is You dish383.bin - You need to rename it by removing the .bn3
13) To rename it just right click the file and remove the .bn3(dish383.bin is what you should see until you finish)click on an open area of the page and the file name should be dish383. The .bin is hidden.
This Bin can be used it Cemu or Yvous if the INI file is directed to it.

[blackdog]

I figured out how to patch now. Thanks Bear!!!!!!!! The few patches that I found when i went to ppv and tried to watch after a min or so froze up then went black. If I switch channels I can watch again but every time I go to ppv same thing. Am I doing something wrong?

[BiggerBear]

Are you Emulating Bev or Dish?
You need to make sure the Patch is for the provider you Emulate.

[blackdog]

Are you Emulating Bev or Dish?
You need to make sure the Patch is for the provider you Emulate.

Im emu dish.

[BiggerBear]

I know someone using Chinaman with a bin I patched to using one of my PPV strings and It has been working over 2 months now. This is how I make my PPV.ne3 files.

MiniRTMV2.5
Open MiniRTMV2.5
You need the latest tier list - in the same folder as MiniRTMV2.5
Choose Provider and Rom Type
Click - Add PPV
Click - Create Random(a bunch of times)
Under Decimal - Change the Lowest PPV ID and the Highest PPV ID
Click - Use This(bottom of screen)
Click - Create NE3 Patch
Name and Save someplace recognizable

How To Find PPV Hi’s and Low’s
Tune to a PPV channel with your receiver
On the remote hit the INFO button(not SYS INFO)
Each PPV has a 5 digit code number in prentices(55744)
Copy them and notice the Highest and Lowest.
You then round down the Lowest - If it’s 55744 round down to 55700
To get the Highest add 18000 to the Lowest ----55700 + 18000 = 73700
Some Say The Spread Should Be Less Than 2000, But I Have Been
Using A Spread Of 18000 And Have Been For A long Time.(It’s Up To You)

[blackdog]

So I assume that you do all of this in nagra. Oh by the way my ppv's are working. After awhile the freezing stopped. I definatley do want to learn to make my own though. Thanks for all your help Bear it has been great info!!!!!!!!

[BiggerBear]

To make the .ne3 file I use MiniRTMV2.5 - read my posts closely !!!!!!!!!!
Then I use NagraEdit to patch the .ne3 file

[blackdog]

To make the .ne3 file I use MiniRTMV2.5 - read my posts closely !!!!!!!!!!
Then I use NagraEdit to patch the .ne3 file


Is the miniRTMV2.5 on my bootdisk or do I have to get that from somewhere? Sorry, thanks for your patients.........

[blackdog]

I figured it out. I can use YATM or mini to make the patches with the info in your post. Thanks Bear for helping me out so much!!!!!!!!! You have been a huge help.