BD3 login Failed ????

[Masta_Mind1]

i was trying to read one of my card and i get

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 32 33 4B
ROM Revision: 010
EEPROM Revision: RevA21
ProviderID: 00
CamID: 00 E0 6D 8B
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BD3 login failed
Reading ROM10 failed
Closing of COM1 was successful

i tried about 5 different programs to unlock or unloop it and tried each program atleast 5 times but no luck...

what is the actual problem when u get bd3 login failed wut does that mean

because if it said backdoor is closed then there is a password on card
if it said backdoor reported disable that means that its looped or locked
but wut does bd3 login failed mean/|??????

any help would be appreciated

[NICKMARC3]

id like to hear the response to that as i have 3 rom 10s that have the same problem except with BD0. ive posted everyware but havnt gotten resolved. try backdoor buster. didnt work for me but peeps sware by it. oh, ive heard there is some possibility of looping.
NM3

[robo]

use the dc2 file named unlockdishmod.d2c

[BirdieMod]

Try Nagraedit 3 for grins, It seems better are restoring correct BD coding

[Masta_Mind1]

use the dc2 file named unlockdishmod.d2c

i couldnt find that on the download section can u tell me which # or section its in or can plz just upload it here....

thanks in advance

[robo]

sorry wrong file

[NICKMARC3]

ok...ill say"uncle"... i give up...where do i find d2c??(actually dc2). upon dl was directed to windows "extension" website but says no links available.
thanx

[Masta_Mind1]

i got the d2c file but where would i use it.. winexplorer wouldnt let me put in the extension d2c.....

any ideas.......

[robo]

nagra hit comm then d2c file test run

[coolwind]

I Have a Rom 10 @ A21 With BD3 login failed Have not been able to open it does anyone have any ideas ?
TKS Coolwind

[dknight420]

try this 1 run mrom6v you must have the right #s 2 run the backdoor fix. get the fix from here http://www.dssftp.com/forum/upload/showthread.php?t=30675 its says for rom11 but it will work on roms10 goodluck if done right it will work

[norhack]

I have 3 rom10s that give the same message"bd3 login failed,write to card failed". However,I put the cards in the stream and they work just fine.After writing to card,make sure to try to read from card to ensure that the blocker is working.You should get "Reading from card failed"when you try to read it.That tells you the blocker is working. Nagra has issues with some revisions of rom10,s. norhack.......

[coolwind]

All programs have not touched this Rom 10 a21 card with the BD3 login failed any other ideas??
TKS Coolwind

[honeybunny]

nagra hit comm then d2c file test run
I dont understand the you said to hit com and run d2c file I dont understand I read my card have bd3 login failed I click comm noth happens ...what am I doing wrong

[Chief]

Don't read the card. Just put it in the programmer.
Open Nagra 4.1, look in the line that has "EEPROM", "Data Editor", etc...to the far right is a button for "comm". Click it.

Now, click the "Open D2C" box, and open your D2C file. To the right of this box is "SEND D2C".

Send it. :)

[honeybunny]

I dont understand the you said to hit com and run d2c file I dont understand I read my card have bd3 login failed I click comm noth happens ...what am I doing wrong
what am I am trying to figure out is how to run a d2c file in Nagra

[honeybunny]

Don't read the card. Just put it in the programmer.
Open Nagra 4.1, look in the line that has "EEPROM", "Data Editor", etc...to the far right is a button for "comm". Click it.

Now, click the "Open D2C" box, and open your D2C file. To the right of this box is "SEND D2C".

Send it. :)
thank you

[honeybunny]

Don't read the card. Just put it in the programmer.
Open Nagra 4.1, look in the line that has "EEPROM", "Data Editor", etc...to the far right is a button for "comm". Click it.

Now, click the "Open D2C" box, and open your D2C file. To the right of this box is "SEND D2C".

Send it. :)
I tried that I click on comm and all I get is a white screen where do you click D2C Box ?

[stealth_315]

great

[Chief]

In the line directly above the white screen, which appeared (directly below the line containing "EEPROM", "Data Editor", etc) when you clicked the COMM button.

[Masta_Mind1]

hey i got my cad opened and up and running... i just wend to download section and downloaded all the a21 file and tried each file at least 5 times

and then in one of the file that i dont remember ... opened the card... so i am all set... thanks for all the support

[access1]

trid the d2c file didnt work.

[mk14er]

there was a ecm that screwed backdoor key and marked card

for first problem

open bin in nagra 4.1 that had been written on card before when it worked


goto line c040 write it down co40 to c04f the whole line

go to nagra do one step clean

when backdoor box pops open put in numbers you wrote down

then finish one step clean


now the second problem is there is now two marks on card

so you can rewrite card apply new software

but card will only give you black screen

so to fix this you must wait for or make your own new blocker
that hides marks

no current blocker will work

good luck to all

ps if you do not have previous bin saved you will not have bd0 keys to get back in

[access1]

I do not think that if you wrote an etire bin to a card before the mark that the bdo is changed. I have the bin that i wrote to my card. but the bdo is wrong. My bro was able to remove his card before the mark, i checked his bdo,(this is the same bin that is on my card) it is totally different that what i show suppose to be on there.