echo 7/ku

[tomjhong]

i just wanted to know how many channels people are getting on echo7 on the 119 for dish,
ive read alot about people inbetween sats and only getting 88 channels and others saying 500,
what is the real number for this echo7,

[rocky02]

I get 173 music channels and at least 500 locals and net works!

[xwolfs7]

i just wanted to know how many channels people are getting on echo7 on the 119 for dish,
ive read alot about people inbetween sats and only getting 88 channels and others saying 500,
what is the real number for this echo7,

Hi! What flash did you use to update your IRD,that would make difference and also if you have your keys turned on.and if all this is done then your not aimed right on echo7.

When I first hooked mine I was 1/2 on 110w & 119w so make sure your lined up right.

check your first channel and Tp it`s on and check with lyngsat channel line up and see which bird your on.

if your aimed at 110w the first channel is History channel.

But you should get way more than 88 channels.
did you load a channels list first before scanning that`s how I did mine I made my own list with Stb Gtools 1.85 set on STB type 2 .
Once you have your list then select tools then STB connect then select download to your IRD.wait until it is finished before you do anything it will reset itself and come on then your tv should be on.
Once it comes on then go to parental control and put in second password to open keys select default keys.
But if your lucky like me I just had to load channels and scan that`s it my keys were on already.
I used the x8500 233 api (N)
good luck

[tomjhong]

sorry for asking dumb questions, but i realy appreate the help,

ok how do i load or make a guide with g-tools, the next question is do i load the 233 first then go to g-tools and make a list some how, third what is the proper order to load the ird, im asuming flash with the 233 bin and then go to g-tools and do a list and download it,

[rocky02]

tomjhong you want to flash you receiver first. Then open gtools and open the channel list of yor choice for 110. 119 or so on. Then right click on the sat. you want to load and go down to tools and click on stb connect then download. Make sure you have the right sbt selected for the receiver you are using. for all the pansat2500 channel guides I use type2 setting!

[azdssnoob]

Take a look for yourself, and see how many chanels...

http://www.lyngsat.com/packages/dish119_sid.html


http://www.lyngsat.com/packages/dish119.html