mike123333
10-17-2004, 06:09 AM
I have a DP 301.010 that has recently been giving me greeth! The issue I am having is that some of the transponders work and majority do not for 61.5, 110, and 119.
After a get some signal on either of the birds above, I check the switch and at times I may get the 110 or 119 with only even or odd but not both. I tried erasing the eeprom and putting a virgin, I tried memory dump, I tried new TSOP and cleaning the active one and leting it update, still no luck. I measured the voltage out of the sat cable connection and am geting the 13 and 18 volts.
The only thing that is odd is that when I smack the receiver lightly or tap on the board, at times the signal comes in. This would appear that there may be a loose connection somewhere.
If anyone has come across this phenomenon before and can led a had I would appreciate it.
PS- the cables and switches I am using are all in working condition. I have another DP301 that I checked on that connection and all is well.
Thanks,
Mike123333
After a get some signal on either of the birds above, I check the switch and at times I may get the 110 or 119 with only even or odd but not both. I tried erasing the eeprom and putting a virgin, I tried memory dump, I tried new TSOP and cleaning the active one and leting it update, still no luck. I measured the voltage out of the sat cable connection and am geting the 13 and 18 volts.
The only thing that is odd is that when I smack the receiver lightly or tap on the board, at times the signal comes in. This would appear that there may be a loose connection somewhere.
If anyone has come across this phenomenon before and can led a had I would appreciate it.
PS- the cables and switches I am using are all in working condition. I have another DP301 that I checked on that connection and all is well.
Thanks,
Mike123333