Yvous problems

[mrfunke]

I do alot of reading but i am at the end of me witts

What i got is a 2700 ird,2.5 ghz,XP, internal emu from satemu, Yvous 3, i set my ird#and box keys but i used all the other defaults and when i run yvous i get Running...i plug my ird in and i get "first byte is not 0x21-evtmask=0*000000001", can someone please help me

[tptp]

Some say a cable from PC to emu board is too long.
I have got this from a system I know to work when starting my emu.
I am not sure why but if I shut down and restart it will work next time.
Start PC,then insert emu board,light on Rec will go out then come back on then start going through transponders 1-5,picture should then come on.

[mrfunke]

After yvous is running i slide a card into rec and then it asks me for a new card or card not valid, i have to activate with a card in slot fisrt though

[BiggerBear]

mrfunke -
You need a CamID Inn the INI File also.
Make sure it's a Rom3
Try another Computer to eliminate the one you have now- I use a 166mhz 64ram Windows98

[mrfunke]

Where do i need to go to find the INI file to put the Cam in it?I made the cam on scammers so it should bego

[mrfunke]

now all i get is error 019

[FreshManDTV]

What is the card revision on yours? I read that when you buy an emu, you have to flash the chip first.

[mrfunke]

i do not know , how do you check the version?

[FreshManDTV]

Press system info or menu, then 6, then 1, then 3.

[mrfunke]

Software version is 769PCAOD-N

[FreshManDTV]

Not that, I am looking for smart card version. Should be DNASP**** something like that, right above the software version. If you don't have DNASP something, then you need to look at your emu board entirely, starting with flashing it. Look for the diagram on how to build a program and learn how to flash it.