121 sat. w/ dp34 switch

[pasor]

I would like to know if the pnsat 2500a works with super dish w/ dp34 switch, any inf will be appreciate.

[jcghound]

The pansat 2500A will work great with the superdish setup. Use a dishpro channel list with diseqc setting #1 on 119, #2 on 110 and #3 on 121. Lnb freq is 11250 and 22KHz is off. Attached is a little tut on using the DP34 switch with the superdish.
hound :p

[mikechang]

[hi !
i need to know which is 119 , 110 . 121 lnb on supper dish , there is 1 dual lnb and next one is one lnb which 2 cable come in out from that lnb , so please help me becuase i still have no signal from that dish to my dp34 swichs. thank you

[jcghound]

Standing to the rear of dish. From left to right 121, 119 and 110. Only 1 cable should be coming out of the single lnb. Go back, open and look at the dp34 attachment. It tells you what you need to know bro. Run 1 cable from each lnb to switch.
hound

[pasor]

The pansat 2500A will work great with the superdish setup. Use a dishpro channel list with diseqc setting #1 on 119, #2 on 110 and #3 on 121. Lnb freq is 11250 and 22KHz is off. Attached is a little tut on using the DP34 switch with the superdish.
hound :p
Thank-you for the information, also if i wrote the legacy channel listings and when i downloaded the dispro listing do it should clear the legacy listings or i should do something before i downloaded the pro listing.

[jcghound]

When you download the channel with gtools it will rewrite the channels bin. It is best to do a factory reset to clear the channel memory before reloading a list as a precaution.
hound

[ajmeri]

When you download the channel with gtools it will rewrite the channels bin. It is best to do a factory reset to clear the channel memory before reloading a list as a precaution.
hound

Hi Guys What is Super Dish. Could you please explain.I have Dish Pro Dish with Dual LNB. Can i use DP34 switch to share my dish with 4 reciever. I am using Fortec life time ultra reciever. Does dp34 switch will work with FTA reciever.

[jcghound]

Hi Guys What is Super Dish. Could you please explain.I have Dish Pro Dish with Dual LNB. Can i use DP34 switch to share my dish with 4 reciever. I am using Fortec life time ultra reciever. Does dp34 switch will work with FTA reciever. I guess you didnt open the file and read the tut on the switch bro. It can replace the 4x1 diseqc switch and was designed for 3 sat hookup and works just as well with only 2 and will feed 4 receivers or more with additional switches.

Here is a quote from the first two sentences : "Here's a picture of the DP34 switch (as used in Superdish setups). It is designed to replace a diseqc switch and control switching between 3 satellites."

[@#$%]

Hello:
If I have 2 Fta with Super Dish, How can i hook up with that . THanks for help.

[jcghound]

Hello:
If I have 2 Fta with Super Dish, How can i hook up with that . THanks for help. open the file above and read it bro. it tells you how to do it.
hound
:p

[@#$%]

Great job, that's mean we can hook up 5 fta receiver with one super dish. Is that right?

[jcghound]

with the dp34 switch and proper switching even more

[Wingnut101]

The pansat 2500A will work great with the superdish setup. Use a dishpro channel list with diseqc setting #1 on 119, #2 on 110 and #3 on 121. Lnb freq is 11250 and 22KHz is off. Attached is a little tut on using the DP34 switch with the superdish.
hound :p
Nice "How to". Looks familiar...

[nelfort]

any idea if it'll work with the DPP+44 switch?

[Wingnut101]

any idea if it'll work with the DPP+44 switch?
If you mean the Superdish, the answer is "yes".

[nelfort]

yes............If I have a Superdish 121 and a reg.18" for 61.5 currently running off a DP+44 switch like the DP34 but can hook up 4orbital locations can I run a Pansat ike the DP34?

anyone have specs......what changes I would need to do?

[Wingnut101]

yes............If I have a Superdish 121 and a reg.18" for 61.5 currently running off a DP+44 switch like the DP34 but can hook up 4orbital locations can I run a Pansat ike the DP34?

anyone have specs......what changes I would need to do?
Here's an image of a dp34 switch that I modified to include another input. That is the only difference between a 34 and a 44. Route the feeds as shown and on the Pansat's diseqc settings change them accordingly.

[nelfort]

Here's an image of a dp34 switch that I modified to include another input. That is the only difference between a 34 and a 44. Route the feeds as shown and on the Pansat's diseqc settings change them accordingly.


would that 4th one your have 61.5 be able to run 91 through that switch or only DN birds?

[pasor]

Here's an image of a dp34 switch that I modified to include another input. That is the only difference between a 34 and a 44. Route the feeds as shown and on the Pansat's diseqc settings change them accordingly.
How did you do that modification, can you go into details? Thank-you.

[nelfort]

How did you do that modification, can you go into details? Thank-you.


yah.......details would be great........4 orbital location 1 switch to run 4 irds pretty good

[lsr1428]

hi there
i would like to know i have a max2000 that was running off a dishnet 500 dual lnb and 18' dish for bev to diseqc switch i took down the dish 500 and install a super dish which has 121,119,110 the 121, 119, come off ilnb and 1 cable to a 3x4 switch to need to know how to setup all 3 lnb's plus the 18' dish for bev also i need to know if it also possible to run a dish reciever still off the super dish i read all the post on this thred but i want to make sure i do it right for th max 2000 and is there any other software to installl on it thabks to any input lsr1428

[Wingnut101]

would that 4th one your have 61.5 be able to run 91 through that switch or only DN birds?
It can run 91 but just remember to use a dishpro lnb. The dp34 can only work reliably with dishpro lnbs.

It's pretty self explanatory here guys. Just get the dish(es) pointed correctly and feed one line from the pro lnbs to the input side of the dp44 switch. From there, you can drive up to 4 receivers.