Rom11 B8A Black Stripe Glitch

[Cid6.7]

I'm useing Toy's_ROM11.XVB Glitcher & this is all I can get outa it...Any Idea's??


Special Edition created for CARD CODERS.

T0Y :)

================================================== =================


CAM Rev : B8A

CAM ID : 01xxxxxF0 <Hex - Values Read From Card>
= S 00 2567 0128 XX <Decimal - Shown On Back Of Card>

240Provider = 0001 = DISH Network.
Started @ 10:42:38 AM

DELAY=15FF VCC=40 Glitch=06 Trying Packet=1 : 300 Attempts with these setting.
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++-++++++++++++++++++!++++++++-++++--++++++++-++++++-++++-++++--+++--++++++++-+--+-+-+-++++-++-++-++++++--++++++++-++-+-++++!

Script Error on Line 348
Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read

[Caddylover]

I'm useing Toy's_ROM11.XVB Glitcher & this is all I can get outa it...Any Idea's??


Special Edition created for CARD CODERS.

T0Y :)

================================================== =================


CAM Rev : B8A

CAM ID : 01xxxxxF0 <Hex - Values Read From Card>
= S 00 2567 0128 XX <Decimal - Shown On Back Of Card>

240Provider = 0001 = DISH Network.
Started @ 10:42:38 AM

DELAY=15FF VCC=40 Glitch=06 Trying Packet=1 : 300 Attempts with these setting.
++++++++++++++++++++++++++++++++++++++++++++++++++ ++++++++++++++++++++++++++++++-++++++++++++++++++!++++++++-++++--++++++++-++++++-++++-++++--+++--++++++++-+--+-+-+-++++-++-++-++++++--++++++++-++-+-++++!

Script Error on Line 348
Sc.Read: Timeout Reading Data From Card - 2 Bytes Requested, 0 Bytes Read


Cid, why don't you try the autoglitcher for Rom 11. Works great, but does take some time.

Caddy

[Cid6.7]

I cant get that one to run either :(

[Caddylover]

Hmmm, weird. Might be a throwaway. LOL. Had a r11 and r3 rev 372 that I couldn't get into either no matter what i did.

I'm sure you know it happens periodically.

Have you asked over at cardcoders?

Caddy

[Cid6.7]

Yep asked over there...The thing is the script wont even run..Read Error before the script even starts..

[indal_98]

Rom 11 with black stripe.....not glitching.....interestin'...

[Caddylover]

I'm assuming this is a customer's card?

Had that with a rom 10 also, constant reset while running glitcher. Found out that the owner of the card tried screwing around with it himself with his ISO and throwing packets at it. So, needless to say it was f*cked from the beginning.



Caddy

[Cid6.7]

no I got it outa a IRD I boought..Person said she just desubbed..But who know..lol

[Caddylover]

Yeah, you never know. But, now that I read your post a little closer, I had a r11 with black stripe that looped itself when glitching. Left it overnight and it went invalid. Hmmm, had these problems before with these r11's??

Caddy

[Cid6.7]

The last R11 I had looped aswell wich I feel bad for cause it was someone else's card

[Caddylover]

Well, that's it, just send me r10s and r3s from now on. LOL

[budman400]

Is it a A2013,I read at CC they have not figured that card out yet.I got to I get in to.

[Crazy1_79]

look at your glitches cid, You know I haven't worked with rom 11's but you are all in the ++ with the occasional return from the 83 command (is it a 83 command on the rom 11?) i know you are getting to be a expert on the card popping but lower vcc or slow down delay.

[Cid6.7]

Would if I could but I have the VCC set @ 99 & if I turn the resistance down it will automaticly error out..

[Cid6.7]

Ok I have it running on default setting's been goin for 10 minutes with no read error's & no resets..WOOOT Now shoosh dont jinx it..lol

Crazy its 63

[Caddylover]

Ok I have it running on default setting's been goin for 10 minutes with no read error's & no resets..WOOOT Now shoosh dont jinx it..lol

Crazy its 63

Awesome, if you get it, could you PM me the settings? Always nice to have just in case, but I've only had 2 rom 11s come through.


Caddy

[Cid6.7]

What were your setting's & were they B8A..?
I ran it all night just to wake up this morning to a read error...Son of a D'oh..!!
I'm running the Rom11B8a-autoglitcher now..I guess there's a error in the script...
So I changed it & it's been running for about 1/2 hour now...I'll keep you posted..