ECM for the weekend

[Rainey]

I just got hit after months of no problem, Not sure if it is PPV or what they are hitting.
I have to j-tag and get the IRD back before i can test.

So Heads up if you have not been hit yet


Rainey

[livnitup731]

pull your cards! everything getting hit as of 3pm mst. have heard may be targeting ppv, anyone confirm no ecm if they have no ppv??

[JellyBean]

I can confirm that I have no ppv on 508 and was hit. I do have multiple locals though for the eastern seaboard.... My 301.013, same everything, is still up and kicking however...

Self compiled CEMU 0.9 running on SuSE Linux 9 and homemade max/mel.

BTW - first time since Oct 27 for me, by my count too.

JellyBean

[d007man]

Mine having exprie ppv strings, got hit few min ago. after 5 months. last time i didn't get hit i don't know the reason for it.

[badbear2000]

just got ecn'd on hbo so the ppv is not where the problem is

[o2world]

I just went down...completely,.JTag'd,..but all black now....5:30 est

[ynot-try]

mine went down too damm had to refresh how to jtag but up and running for now dont know how long for.

[o2world]

Location ID still intact,..so JTAG works =)....but no TV at all... anyone have any news on this? how long?,....

If I program my cards without PPV, then will I get everything else?

[Cid6.7]

Still up & runnin here Rom10 IRD 301:010 No Locks @ all..Just wide open rom 10.. :)

[Superbee]

Jelly bean how did you get your 508 running again?
last time i was down was 11-15-2004
Mine is in a endless reboot
Last time i just reprogrammed the eeprom and was back up
reprogrammed the eprom this time no luck
Still endless reboot?

[bols2dawaLL]

constant reboot here 2 . 4900 with plastic rom 10 and AR lock

[skinerd]

About 4:45 CST my 301-010 reboted..........so lock saved mine....

[ghost1412]

I do have 301.10 with D L it went down on Atmega but when I try my Rom 10 it is still up and running for almost 1 hrs I will keep you guys updated

[troy_mccular]

Ok here is a facts.
My father-in-laws rom3 emu setup was hit and it had no PPV strings whatsoever. so it can't be PPV strings I haven't been home to see if i've been hit I'll let you know.

[ynot-try]

i had to rewrite an old flash to mine but popped atmega back in didnt even change it so i know i should be hit again but so far been up over an hour

[JellyBean]

Jelly bean how did you get your 508 running again?
last time i was down was 11-15-2004
Mine is in a endless reboot
Last time i just reprogrammed the eeprom and was back up
reprogrammed the eprom this time no luck
Still endless reboot?

Unlike most people, I keep sector by sector copies of my flashes as my equipments' firmware is upgraded. If you have a look at my post from the last time I was ecm'd (back on Oct 27 --> http://www.dssftp.com/forum/showthread.php?t=33475) you will see exactly which bytes to edit in SA60 to fix the ecm. I trust you have a jtag and know how to use it...

To make life a bit easier for ya, here is a C&P of my Oct 27 post:

--- begin cut & paste ---

FYI - it would appear the ecm sector has moved from SA61 to SA60 with firmware version P223 as per below:

C:\TEMP>FC /B PVR508_P223_FLASH2_SA60_ECM'D.BIN PVR508_P223_FLASH2_SA60_GOOD.BIN

Comparing files PVR508_P223_FLASH2_SA60_ECM'D.BIN and PVR508_P223_FLASH2_SA60_GOOD.BIN
00002D8E: 78 FF
00002D8F: 88 FF
00002D90: B4 FF
00002D91: 4F FF
00002D92: 14 FF

Firmware version P222 was located at SA61.

--- end cut and paste ---

BTW - it only took me about 60 seconds to fix my 508 tonight - its taken my wife about 30 minutes now trying to set her recording timers back up... :-)

Oh, and I can't remember if I posted it here or over at kickin, but about 8 or 9 months ago I posted an "auto-it v3" script to automate sector by sector backups of flashes (you can find it here: http://www.dssftp.com/forum/showthread.php?t=25832). Have a look for it if you have several different recievers you want to backup. Over at kickin I'm know as IAM JellyBean.

JellyBean

[monkeyluv]

its just a software upgrade redo TSOP and you should be fine, it's not the card thats hit it's the receiver

[die4irish]

Unlike most people, I keep sector by sector copies of my flashes as my equipments' firmware is upgraded. If you have a look at my post from the last time I was ecm'd (back on Oct 27 --> http://www.dssftp.com/forum/showthread.php?t=33475) you will see exactly which bytes to edit in SA60 to fix the ecm. I trust you have a jtag and know how to use it...

To make life a bit easier for ya, here is a C&P of my Oct 27 post:

--- begin cut & paste ---

FYI - it would appear the ecm sector has moved from SA61 to SA60 with firmware version P223 as per below:

C:\TEMP>FC /B PVR508_P223_FLASH2_SA60_ECM'D.BIN PVR508_P223_FLASH2_SA60_GOOD.BIN

Comparing files PVR508_P223_FLASH2_SA60_ECM'D.BIN and PVR508_P223_FLASH2_SA60_GOOD.BIN
00002D8E: 78 FF
00002D8F: 88 FF
00002D90: B4 FF
00002D91: 4F FF
00002D92: 14 FF

Firmware version P222 was located at SA61.

--- end cut and paste ---

BTW - it only took me about 60 seconds to fix my 508 tonight - its taken my wife about 30 minutes now trying to set her recording timers back up... :-)

Oh, and I can't remember if I posted it here or over at kickin, but about 8 or 9 months ago I posted an "auto-it v3" script to automate sector by sector backups of flashes (you can find it here: http://www.dssftp.com/forum/showthread.php?t=25832). Have a look for it if you have several different recievers you want to backup. Over at kickin I'm know as IAM JellyBean.

JellyBean




is kicken gone? went to visit the site the other day and it keeped rerouting me to a web hosting site saying the domain name was up for sale

[littlelarryjr]

.info, not org