View Full Version : Did Any one else just get a Rcvr Hit????
beebe
02-04-2005, 12:25 AM
Just got a receiver hit, wondering if anyone else did to?
Got a phone call 10 minutes ago saying a friends reciever got hit.
PCB2
bols2dawaLL
02-04-2005, 12:28 AM
me 2
clarkjames44
02-04-2005, 12:31 AM
Just got hit with seriuos error message, what do I need to do, reset reciever?, Rom 3, been up over 4 motns untill just now?, using 3900
neilandsuhar
02-04-2005, 12:31 AM
Just got a receiver hit, wondering if anyone else did to?
yes ah ha
Colleenlee
02-04-2005, 12:37 AM
I got hit too, I am running Atmega 128 with a 2700.
mrmark28
02-04-2005, 12:45 AM
well i just did a sector errase and restreamed put back in card and im watching tv again just not sure for how long?
Cid6.7
02-04-2005, 12:45 AM
Runnin strong here
ynot-try
02-04-2005, 12:45 AM
time to break the jtags out guys
littlelarryjr
02-04-2005, 01:20 AM
whats the ECM fix on a 301.010?
EMC510
02-04-2005, 01:23 AM
Ird 301 010 got hit with 153.
ECM FIX
301-010 Flash 1 SA3
301-013 (Single chip) Flash 1 SA49
301-013 (Double chip) Flash 2 SA15
2700, 2800, 3700 Flash 1 SA5
3800, 3900, 4700, 4900 Flash 1 SA30
501, 508 Flash 2 SA52 or SA54 and SA60
norton
02-04-2005, 01:36 AM
do you guys have locks on your irds or not? I have one on mine and got hit as well
skinerd
02-04-2005, 01:39 AM
do you guys have locks on your irds or not? I have one on mine and got hit as well
Ar105b lock on my 301-010, rebooted and back up in a couple minutes.
littlelarryjr
02-04-2005, 01:45 AM
hey skinerd, is SA3 on flash 1 still right for 301.010?
Thanks
Jessica
02-04-2005, 01:47 AM
hey skinerd, is SA3 on flash 1 still right for 301.010?
Thanks
I'm not he but the answer is Yes.
Jessica :)
norton
02-04-2005, 01:54 AM
Ar105b lock on my 301-010, rebooted and back up in a couple minutes.
hrmm, when i went to reflash my 3900 found a wire came unsoldered, maybe that let the flash write slip through? fixed it though, it was the wire on SB44 that was disconnected
joesnuffy
02-04-2005, 01:58 AM
I'm not he but the answer is Yes.
Jessica :)
Now thats a good picture.
Joe :)
littlelarryjr
02-04-2005, 02:04 AM
what the hell does I'm not sure but the answer is yes mean? are you not sure? or is the answer yes?
and ya very nice picture
dravas
02-04-2005, 02:07 AM
She said she is not he, and the answer is yes.. And i'm sure she's sure.
garysam
02-04-2005, 02:08 AM
I think it said "I'm not HE, but the answer is yes.
Animal99
02-04-2005, 02:09 AM
I'm not he but the answer is Yes.
Jessica :)
I usually flash SA8 on Flash 1 for my 301.10. Is there any difference? It takes about 10-20 mins to restream and has always worked...Thanks
Animal99
littlelarryjr
02-04-2005, 02:21 AM
holy shit, I guess I was looking at thoose tits more than I thought LOL
rubberman
02-04-2005, 02:23 AM
my 3900 running Yvous got hit along with some friends. All Locatrion ID 0000001.
IS it the PPV strings that Charlie is checking?
littlelarryjr
02-04-2005, 02:27 AM
no, cause I'm running 2 301.010's one with PPV and one without, both 0000001
joesnuffy
02-04-2005, 02:29 AM
holy shit, I guess I was looking at thoose tits more than I thought LOL
I guess were all quilty of that, if you can't watch tv you can just read these forums.
On a serious note I have a crap pile of recs and none got hit no digital locks though. They all have a 50 cent jy switch but no threatning phone calls or nasty emails so I guess everyones happy. I have 2-11s and atmegas no magic cards though and thats on Bev and Dish. Also running Milis blocker on dish and free blocker on bev.
Joe :) :)
rubberman
02-04-2005, 02:39 AM
if i reflash my 3900 will it get hit again? or should i wait till we see whats going on?
joesnuffy
02-04-2005, 02:47 AM
if i reflash my 3900 will it get hit again? or should i wait till we see whats going on?
I would go ahead and run it since your card didn't get killed. If you install a push button switch to points SB39 and SB40 you can short them for 20 seconds for a 3900 and it will fix itself using the stream. They call it the junk yard fix if you don't abuse it it works but use at your own risk. Saves on digging out a jtag or somebody yanking out their entire rec to come visit you. JY fixes are covered in their own thread just do a search
2800-3800 10 seconds sb 39 and sb 40
3900 20 seconds sb39 and sb 40
301-010 45 seconds R293 closest to tsop chip and grd
301-013 Cant remeber off my head
I hope this helps
Joe
Dick_Firestone
02-04-2005, 03:10 AM
2800-3800 10 seconds sb 39 and sb 40
3900 20 seconds sb39 and sb 40
301-010 45 seconds R293 closest to tsop chip and grd
301-013 Cant remeber off my head
I hope this helps
Joe
My 301-010 resets in 15 seconds, just at second flash of the "ON" Led in front of the receiver... I think 45 seconds is too much...
My two cents.
joesnuffy
02-04-2005, 03:13 AM
My 301-010 resets in 15 seconds, just at second flash of the "ON" Led in front of the receiver... I think 45 seconds is too much...
My two cents.
Your Right,
The 45 seconds is for a junk yard fix thats totally different than a digital lock tsop fix. I also understand you are counting the blinks of the green light while you hold button in my experience using a watch when the rec gets close to 40 seconds it blinks one last time before 45 seconds and thats normally the blink I need. In my experience with a large volume of 301s 45seconds worked the best especially after a ECM not trying to step on toes.
Joe :)
bluenation
02-04-2005, 03:20 AM
have 301.13 got hit, j-taged it and erased sa28, is up and running only been 10 mins, guess i will see if it works, will let know if works
Jessica
02-04-2005, 03:53 AM
I usually flash SA8 on Flash 1 for my 301.10. Is there any difference? It takes about 10-20 mins to restream and has always worked...Thanks
Animal99
Either will work, but I've always used SA3 (Flash 1) and am up and running in 10 mins flat.
Simply do this, reapply your card or Atmega and you'll be up & running!
Jessica :)
lightning0009
02-04-2005, 04:16 AM
2700 with rom11 got hit with the seriouse receiver error. Unplugged ird, pushed in simple reset for five seconds, it downloaded the software in three minutes and back up and running fine for the last four hours. Must have been a hit and run. Rom11 with a few to many locals and three legit ppv's stings from 4 months ago and one wide ass one from 10000 to 95000 with checksum blocker.
Soapstreet
02-04-2005, 06:34 AM
My 2700 got hit. Erased SA5 3 times and restreamed. But now I only have the info channels. Anyone know what happened to the card?
Thanks.
beebe
02-04-2005, 06:47 AM
Just wondering if this is a forecast of thing to come for super bowl weekend.
Seems charlie hits when the ratings are the highest., i.e. Super bowl , sweeps week etc. maybe im just paraniod? Could be the foreshadowing of the weekend ahead!!!! Get ready to J-TAG.. Good luck .
lightning0009
02-04-2005, 06:50 AM
soapstreet,
I don't know about your card, but sounds like you still got location Id 00001. Did you check you system info screen to see?
beebe
02-04-2005, 06:54 AM
My 2700 got hit. Erased SA5 3 times and restreamed. But now I only have the info channels. Anyone know what happened to the card?
Thanks.
I have had this problem before , just re erase your rec and it will be fine , it just never went the first time.
skinerd
02-04-2005, 06:56 AM
Just wondering if this is a forecast of thing to come for super bowl weekend.
Seems charlie hits when the ratings are the highest., i.e. Super bowl , sweeps week etc. maybe im just paraniod? Could be the foreshadowing of the weekend ahead!!!! Get ready to J-TAG.. Good luck .
Notice that it was done before the weekend?? And it hit a lot of subs....they would not want to zap subs during the game weekend.......anyway we can hope they won't try again for a while.
rubberman
02-04-2005, 06:11 PM
so has anyone went back down after jtagging to fix the ECM?
bluenation
02-05-2005, 11:32 PM
so has anyone went back down after jtagging to fix the ECM?
yes, did flash 2, sa28 went down. Now trying flash2 sa-15,will see what happens.(that is with 301.13,just in case)
vBulletin® v3.8.4, Copyright ©2000-2009, Jelsoft Enterprises Ltd.