Signal Error

[pats2306]

hello all,

I have a dual single LNB for my 3 sats (110,119,121) being split to 2 IRd.s using a SW41 switch with a 3100 IRD. I changed the switch to a SW34 so I can use a 6000 IRD. when I do a check switch on the 3100 with the sw34 it picks up the switch but shows NC on SAT1 , 2, 3.

Can anybody please let me know whats happening.

Thanks,

[Smurftoon]

If you mean a DP34 Switch, it won't work on a 6000 with out a Dish Pro Adapter. There is no Dish SW34 Switch. Do you have Legacy LNB's? You might visit the following for more info on LNB's/Switches:

/http://www.switchinfo.info/

[pats2306]

If you mean a DP34 Switch, it won't work on a 6000 with out a Dish Pro Adapter. There is no Dish SW34 Switch. Do you have Legacy LNB's? You might visit the following for more info on LNB's/Switches:

/http://www.switchinfo.info/

Thanks for the reply. Yes I do have the dish pro adapter for the 6000, but there is no signal on either the 301 or the 6000. It detects the SW34 as the switch but does not detect the sats. How do i know if they are legacy ... they have no DISH PRO symbols on the LNBs.

[Smurftoon]

There is no Dish SW34 Switch. If the LNB's do not have a Black DP Logo, they are Legacy and will not work with a DP34 Switch. You can not mix Legacy and Dish Pro LNB's/Switches.