301.013 with zero signal

[Ted Bundy]

This post is for a second receiver I have. It is a 301.013 dual tsop receiver. The receiver itself works fine as far as power and info on the system info screen. The problem is that is never gets any signal from the lnb. I can hook up a second receiver to the lnb and it works fine. On the start up screen that searchs for signal for 5 satellites it says satellite: Default. The transponder changes, but the bottom always says 0 of 5. It never changes. I have reflashed the tsops and put in a virgin eprom. This seems to check out fine, just like an antennae is not connected.
Does anyone have any suggestions?
Thanks

[fread]

This post is for a second receiver I have. It is a 301.013 dual tsop receiver. The receiver itself works fine as far as power and info on the system info screen. The problem is that is never gets any signal from the lnb. I can hook up a second receiver to the lnb and it works fine. On the start up screen that searchs for signal for 5 satellites it says satellite: Default. The transponder changes, but the bottom always says 0 of 5. It never changes. I have reflashed the tsops and put in a virgin eprom. This seems to check out fine, just like an antennae is not connected.
Does anyone have any suggestions?
Thanks
hi same problem here i belive it is in the way jkeys or flash edit works with these irds {dual 13} if you notice when you open in flash edit the flashes come up diffrent either 301.13 moved ird info or 301.13 2 flash after saveing tsops i cant seem to get them to apear rite in jkeys they come up as 301/3100 i belive this to be our problem
if you check yours with flash edit under begginer you will notice that it will not open unless you hit advanced still working on mine
ps dont belive its the box if i flash mine to p182 i do get signal but when it updates loose signal again like i wrote i do belive its the way we are programing this ird

[teknikal]

try doing a check switch that's what i did

[Ted Bundy]

I have tried checking the switch, this does nothing on this receiver. All it says in the boxes is : CONN, nothing else.