PDA

View Full Version : Why my unlooper always VCC=XXXXXXX (90-10)

szyuhong
03-09-2005, 06:20 AM
:(
bigfish
03-09-2005, 06:22 AM
:(

More detail will help.
szyuhong
03-09-2005, 01:26 PM
More detail will help.


I am use mikobuIII and D7-D8-D9 flash,But use VCC Analyzer v2 Script vcc=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXXXXXXXXX

I test max 90-10min too,It is no vcc=------+++++++++-------------+-+++----
I try flash other,But vcc=XXXXXX too.:(
Is it bad My mikIII?
unlock Rom10 A23
Cid6.7
03-09-2005, 02:55 PM
1st off those test settings are way to wide..
Do it in smaller increments when changeing them..
do it like this start @ 09 high & 00 Low.Then raise each by 10 to 19&9 & so on

Have you ever unlocked a rom10 with your loader before..?
If you get this with all cards I'd be thinking its your loader..
Crazy1_79
03-09-2005, 09:48 PM
sounds like a bad communication with card, a looped card, or simply a card that likes to drop into reset. Swing the pot way lo and then slowly bring it back up as you are seeing the XXXXXXXX see if you can snap it out of it.
szyuhong
03-10-2005, 02:51 PM
1st off those test settings are way to wide..
Do it in smaller increments when changeing them..
do it like this start @ 09 high & 00 Low.Then raise each by 10 to 19&9 & so on

Have you ever unlocked a rom10 with your loader before..?
If you get this with all cards I'd be thinking its your loader..

Thank Cid6.7,I am no unlocked a rom10 with my loader before.
szyuhong
03-10-2005, 02:52 PM
sounds like a bad communication with card, a looped card, or simply a card that likes to drop into reset. Swing the pot way lo and then slowly bring it back up as you are seeing the XXXXXXXX see if you can snap it out of it.

Thank you Crazy1_79,No work too. :(
Cid6.7
03-10-2005, 03:48 PM
Read the card in your ISO what does it give you for a response
Sorry what I wanted to ask was have you unlocked any card with the loader rom3/10/11..?
szyuhong
03-10-2005, 04:38 PM
I have no BD0 KEY,But I open boxkey and I want unloop it . Try rom10 A3D vcc=xxxxxx too.

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 32 33 4B
ROM Revision: 010
EEPROM Revision: RevA23
ProviderID: 95
CamID: 40 64 C4 F2
Using BD3 Key: 4E 69 70 50 45 72 20 49 73 20 61 20 62 75 54 74
Attempting to login to BD3
BackDoor login verified
Dumping Dataspace
Backdoor retrieval has been blocked
Attempting to login to BD3
Attempting to login to BD0
Unable to login, bad password detected
Login attempt aborted
Reading ROM10 failed
Closing of COM1 was successful
Cid6.7
03-10-2005, 04:44 PM
Whats provider 95..?
szyuhong
03-12-2005, 06:44 AM
It is 9501.
Is it need edit flash asm filses or Script cmd03 and cmd12 date?