data is being downloaded and data input

[tony1976]

i have only Dish Network 119 it working for while then message come up "data being downloaded" then other come and other message come up "data input" something like that.
i found FTA complete setup follow step by step, the result is the same. i also change Dish Network Key 00, but not work. anyone know what's wrong. thanks

[37coupe13]

are you saving the key change

[indica]

im getting please input data to

[ajmeri]

Hi guys i changed key yesterday and was good untill 6:10pm today. Now i m getting message data being downloaded on all channels.I aimed towards 61.5 and most of the channels is international.

Any idea......

[ajmeri]

Hi i just got new active key 1. changed it and working fine.

[tomzontop]

new key 01= 7354B2CD7BA678E5 good luck tomzontop

[tony1976]

are you saving the key change

yes i did save it. press OK 4 or 5 time.
which KEY i have to key in??????? key 00 or key 01???

[kajmaku]

Im getting the same message input data

[37coupe13]

KEY 01
Make sure your entering it in the Dish Network page.
there is other Keys for other satelites

[tony1976]

KEY 01
Make sure your entering it in the Dish Network page.
there is other Keys for other satelites

do you know which one is latest flash bin file for pansat 2500a??? i'm knew to this thanks.

[37coupe13]

i think you have to enter the key change manually

[tony1976]

i think you have to enter the key change manually

i know i have to manual key in.
so i can use any flash bin file then manual key in????

[Alondra]

Hi I just entered this key to my fortechultra and I still can't get the channels can you tell me what could be wrong with my receiver or what is going on I did it more than once and I still not getting signal!!!!can someone help me please!!!! :cry: new key 01= 7354B2CD7BA678E5 good luck tomzontop

[kajmaku]

ok dishnet is down we need a new code

[37coupe13]

code is posted

[snowman777]

Check and make sure u have both key changes Key00 was changed tuesday and today Key01 changed.

[Doobiedog]

new key 01= 7354B2CD7BA678E5 good luck tomzontop


Hey tomzontop,

Where are you finding the new keys...?

Thanks...!

[ynot44444]

hey guys...the keys are working great! Kentucky here :)

[8nater8]

Can someone post step by step how to put new keys in or point me in the right direction on where I can a how to? Thanks

[sturgeonman]

there is a howto here http://www.dssftp.com/forum/showthread.php?t=41527
I'm not sure if those are still the current keys though. good luck

[Top40]

Hit Menu button and select Parental Controls

Scroll down to 2nd PIN/enter 0000

Scroll to Nagravision

( use r/l arrows) On the top right Select Dish NETWORK

scroll down

select Key Number…Change to 00

scroll down to Key Data

enter new key: 8A C4 96 93 EC 79 9D 57

(The letter keys are shown on the screen by the remote function key).

Check it carefully.

scroll up

select Key Number 01

Check Key Data to see if it changed to:
73 54 B2 CD 7B A6 78 E5

If it has not changed scroll down to Key Data and enter:
73 54 B2 CD 7B A6 78 E5
(Same letter keys as above - bottom of screen) check it carefully.

Hit and hold OK until it flashes (red, bottom right) on the screen.
Hit exit several times to out and watch TV


On Remote Control:

A=? B=I C=Sig

D=Pause E=Sat F= Epg

[tony1976]

Hit Menu button and select Parental Controls

Scroll down to 2nd PIN/enter 0000

Scroll to Nagravision

( use r/l arrows) On the top right Select Dish NETWORK

scroll down

select Key Number…Change to 00

scroll down to Key Data

enter new key: 8A C4 96 93 EC 79 9D 57

(The letter keys are shown on the screen by the remote function key).

Check it carefully.

scroll up

select Key Number 01

Check Key Data to see if it changed to:
73 54 B2 CD 7B A6 78 E5

If it has not changed scroll down to Key Data and enter:
73 54 B2 CD 7B A6 78 E5
(Same letter keys as above - bottom of screen) check it carefully.

Hit and hold OK until it flashes (red, bottom right) on the screen.
Hit exit several times to out and watch TV


On Remote Control:

A=? B=I C=Sig

D=Pause E=Sat F= Epg


i did exactly you r showing above, reciever still give me data being download, i also did scan, got all channel i want. any other way to try

[snowman777]

Tony, re check the keys again and see if they locked in, tuesday i had to do it twice because I went to fast and did not lock in Keyoo. If that does not work i will try to find a bin that the keys have been changed for u to put on.

[37coupe13]

make sure code key function is turned on

[tony1976]

Tony, re check the keys again and see if they locked in, tuesday i had to do it twice because I went to fast and did not lock in Keyoo. If that does not work i will try to find a bin that the keys have been changed for u to put on.

i did locked. i did look for Dish Network key, enter key00 first then save it, turn off reciever, turn back on, go back dish network key00 still there, so enter key01 save it, turn off IRD one more time, still same message. keycode function is ON.
i don't know why.

[37coupe13]

the new code is in Key#01 (not 00)
then type in rest of code.
save it then exit several times and watch TV
no need to trun off receiver after entering code just have to press OK

[37coupe13]

sorry you have a pansat.I read that you have to turn it off.
going by what i do with a Fortec and Pantec

[tony1976]

the new code is in Key#01 (not 00)
then type in rest of code.
save it then exit several times and watch TV
no need to trun off receiver after entering code just have to press OK

i know i don't have to turn off, i just double check.
here are what i key in
key00 8A C4 96 93 EC 79 9D 57
key01 73 54 B2 CD 7B A6 78 E5

[37coupe13]

so you have to enter both keys ?
for last keys code i overwrite the 00 code with the new 01 code
the 00 code doesn't appear anymore on screen
just 01
73 54 B2 CD 7B A6 78 E5

[37coupe13]

read on an other forum
make sure to type in the 01 in code section, not just right arrow it to 01.It won't save properly if you right arrow it