kadak
03-13-2005, 11:07 PM
hey guys. i have a rom 10 a24 i let stream update without a blocker and now all i get is
Executing Script: C:\Documents and Settings\Administrator\Desktop\rom3unlooper\powers yncunlockallver2b-&-howto\PowersyncUnlockALLver2b-&-HowTo\For Both Rom-3 & 10.xvb
________________Setting up WinExplorer_________________
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
VCC High &h28
VCC Low &h20
TX Data : 02 03 00
TX Data : 02 02 00
TX Data : 08 0E 03 10 01 01 03 9A 00
RX Data : 08 1B
RX Data : 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 32
TX Data : 12 15 AB 21 00 08 A0 CA 00 00 02 12 00 06 55 0E
03 8B 00
RX Data : 11 00
@@@@@@@@@@@@ Testing for good glitch voltage @@@@@@@@@@@@@
VCC 28: XXXX--------XXXXXXXXXX------XXXXXXXXXXXX------XXXXXXXXXXXX----XXXXXXXXXXXX------XXXXXXXXXX------XXXX
VCC 27: XX------XXXXXXXXXXXX------XXXXXXXXXXXX------XXXXXXXXXX------XXXXXXXXXXXX------XXXXXXXXXX------XXXXXX
VCC 26: ----XXXXXXXXXXXXXXXXXXXX
this if from a volts find glitch
what seems to be in ? is the rx data:11 00
when i find volts and glitch the card all i get is ff;s and rests no 69's.
the problem is i didn't think to look to see if the card was marked before i let it stream update. that might have been the problem. it saw that it was marked and killed the card on update.
atr is stell good and when i put the card in a rec it turns the power off and will not turn on untell you remove the card. weird
i and using a powersynic board i put together tried all flashes and scripts that are pliblic. so any help would be great. thanks
Executing Script: C:\Documents and Settings\Administrator\Desktop\rom3unlooper\powers yncunlockallver2b-&-howto\PowersyncUnlockALLver2b-&-HowTo\For Both Rom-3 & 10.xvb
________________Setting up WinExplorer_________________
Sc.Read: Timeout Reading Data From Card - 4 Bytes Requested, 0 Bytes Read, Continuing Script
VCC High &h28
VCC Low &h20
TX Data : 02 03 00
TX Data : 02 02 00
TX Data : 08 0E 03 10 01 01 03 9A 00
RX Data : 08 1B
RX Data : 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
30 31 30 20 52 65 76 41 32
TX Data : 12 15 AB 21 00 08 A0 CA 00 00 02 12 00 06 55 0E
03 8B 00
RX Data : 11 00
@@@@@@@@@@@@ Testing for good glitch voltage @@@@@@@@@@@@@
VCC 28: XXXX--------XXXXXXXXXX------XXXXXXXXXXXX------XXXXXXXXXXXX----XXXXXXXXXXXX------XXXXXXXXXX------XXXX
VCC 27: XX------XXXXXXXXXXXX------XXXXXXXXXXXX------XXXXXXXXXX------XXXXXXXXXXXX------XXXXXXXXXX------XXXXXX
VCC 26: ----XXXXXXXXXXXXXXXXXXXX
this if from a volts find glitch
what seems to be in ? is the rx data:11 00
when i find volts and glitch the card all i get is ff;s and rests no 69's.
the problem is i didn't think to look to see if the card was marked before i let it stream update. that might have been the problem. it saw that it was marked and killed the card on update.
atr is stell good and when i put the card in a rec it turns the power off and will not turn on untell you remove the card. weird
i and using a powersynic board i put together tried all flashes and scripts that are pliblic. so any help would be great. thanks