PDA

View Full Version : low voltage at the card slot on Mikobu 3 rev C

Crazy1_79
03-15-2005, 10:54 PM
A member of this site sent me a mik 3 to mod, I completed the mod but my voltage at the vcc of the card slot is around 8 volts max, it also seems to jump irregularly to me, the voltage at the voltage regulator is 5.02 volts so the voltage regulator can be ruled out. Also this is without a pot or resitor inbetween the vcc of the card slot and the C10 capacitor. Does anyone have any suggestions as to what could be bringing the vcc down on this Mik? I am using a 12 volt 800 MA power supply. I have been over the mod a couple of times and it looks flawless. I need a suggestion here.
Crazy1_79
03-16-2005, 04:02 AM
anyone? this loader has this crazy1 stumped, hey guys, if you crack nagra2, I'll change my name to crazy2!!!!
Crazy1_79
03-17-2005, 03:34 AM
skinerd, where are you brother? I know you might have a idea on this one?
wasup
03-20-2005, 01:53 AM
bump
Crazy1_79
03-20-2005, 01:56 AM
hey wassup in case you haven't figured it out, this is your loader and I am still stumped on it. I apologize for the delay, I put it aside to work on another project hoping a light of brilance will strike me and help me solve this, had a idea today, will get on it shortly.
wasup
03-21-2005, 02:22 AM
hey wassup in case you haven't figured it out, this is your loader and I am still stumped on it. I apologize for the delay, I put it aside to work on another project hoping a light of brilance will strike me and help me solve this, had a idea today, will get on it shortly.
I got faith in you. U DA MANG.
udntcme
04-04-2005, 06:19 AM
I'll check mine and see what I get...Never metered it out it just worked so i figured don't mess with it .I'll get back here soon as I can.
Crazy1_79
04-04-2005, 06:24 AM
You should have around 5 volts, I didn't I gave up on the loader and shipped it back, we have worked out a different arrangement to make up for my failure, I am not happy about it, but know when I have to admit defeat. If anyone can fix it. Talk to wassup through pm.
udntcme
04-04-2005, 06:27 AM
Yep 5v.....
udntcme
04-04-2005, 06:29 AM
Actually about 4.67v.
Crazy1_79
04-04-2005, 06:33 AM
4.67 is probally around the bottome end of Ok. I think my black board t911 is right around there if memory serves me correct. but I also use Vcc ranges in the scripts of 10 and 0 for all my card unlocking.