Espressomorning
03-27-2005, 08:00 PM
I'm having trouble with my ETA ATmega Card 1.0D, ATMEGA1286AC 0220.
The card shows errors when I click on read using jeepersdx210.
(read) memory offset exceed image size "40d"
(read) type mismatch in assignment "getimageDWORD {EEP,40d,LE}
And if I click on Verify EEPROM then it shows,
Verify error at EEPROM offset 3B. Verify 07, read 09, Continue Checking? Clicking continue shows errors at different locations.
Verify programs shows Flash verifyed 100%
My guess is that the EEPROM needs to be completely erased, or maybe its because the lock/fuse settings are wrong, the fuse low column has CKSELO
unchecked but if I check it and write it dosen't stay changed. I also tried the advice to change them back to defaults but the programs instantly says the flash/eeprom erased succesfully; no chance to pull or replace the jumper.
The card was working; perhaps it received a static shock.
Is this card chip frequency 18MHz? ATMEGA128 16AC 0220 with a
crystal that says FS184-2.
Thanks for any help.
The card shows errors when I click on read using jeepersdx210.
(read) memory offset exceed image size "40d"
(read) type mismatch in assignment "getimageDWORD {EEP,40d,LE}
And if I click on Verify EEPROM then it shows,
Verify error at EEPROM offset 3B. Verify 07, read 09, Continue Checking? Clicking continue shows errors at different locations.
Verify programs shows Flash verifyed 100%
My guess is that the EEPROM needs to be completely erased, or maybe its because the lock/fuse settings are wrong, the fuse low column has CKSELO
unchecked but if I check it and write it dosen't stay changed. I also tried the advice to change them back to defaults but the programs instantly says the flash/eeprom erased succesfully; no chance to pull or replace the jumper.
The card was working; perhaps it received a static shock.
Is this card chip frequency 18MHz? ATMEGA128 16AC 0220 with a
crystal that says FS184-2.
Thanks for any help.