collsat 400 pro help

[jackiechan]

Who know setting and download for coolsat 400 pro help me thanks

[el6]

I did not write this, credit goes to thedssguy and topcat.

Loading your Coolsat4000 Pro

Downloading Firmware
CoolSatPro uses a Straight thru cable Like (pansat).

Make sure STB is connected to the computer using Right Cable for your receiver !!

1. Turn STB power ON
2. Open STBTOOL.exe application icon
3. STBTOOL v1.5 screen appear. Firmware page and Download buttom will be selected which is preset
4. Browse and locate COOLSAT4000_124_20050331.stb and Open it
5. Click Auto Detect buttom to verify your computer COM port then click Exit
6. Click Connect then Start. It will take about 1 minute
DO not interupt until download is completed
7. Once you see Vision 1.24 detected click X on the top right


Downing Channels

Make sure STB is connected to the computer using Right Cable for your receiver !!
1. Turn STB power ON
2. Open STBTOOL.exe application icon
3. STBTOOL v1.5 screen appear. Firmware page and Download buttom will be selected which is preset
4. Select Channels page and select Download buttom
5. Browse and locate ADD@82,97_11022004.NDF (Or any other NDF Channel list that is Matched to your lnb,s) and Open it
5. Click Auto Detect buttom to verify your computer COM port then click Exit
7. Click Connect then Start. It will take about 20 seconds
DO not interupt until download is completed
8. Once you see Vision 1.24 detected click X on the top right

Hook up STB to TV and wait for 2 minutes channels will show up.
Make sure you have the right Diseqc Setting ( Hardware and Software match )
STB are preset to 0000 password

Enjoy TV