No signal or Scrambled channels with list

[CYCO]

HELP! WHATEVR list i use i get scrambled channels. and i have used a bunch of new and old lists. when i do blind scans i get channels with 2 or 3 PPVs and no sports events like UFC and Pride. which is the only reason i got the Coolsat pro.I did manage to watch ufc 1 time. and did a re scan of channels and now i can't get it back. Can anyone please help me with this? Thanks

[el6]

more info please

--------------------------------------------------------------------------
Diseqc Settings-------------***************** ?
Dish/Dish's------------------***************** ?
Lnb/Lnb's-------------------***************** ?
Network/Satellite------------**************** ?
Description of problem-------***************** ?
What you have tried already-***************** ?
--------------------------------------------------------------------------

[LuckLarry]

The channel lists don't match the transpoder values. Make your own current list with cmaster. The NHL tiers change every day.

[CYCO]

more info please

--------------------------------------------------------------------------
Diseqc Settings-------------***************** ?
Dish/Dish's------------------***************** ?
Lnb/Lnb's-------------------***************** ?
Network/Satellite------------**************** ?
Description of problem-------***************** ?
What you have tried already-***************** ?
--------------------------------------------------------------------------
Using a superdish with sats 105 110 and 119
and for some reason i cannot get a signal strength on 105. it stays in the red
Iwhat i have tried is just doing blind scans and channel lists.which i dont get anything but scrambled channels and bad signal nags.I have tried different Diseqc settings as to 119 commited on 1 and 110 commited on 2 and 105 commited on 3. and also with diseqc set to off. What can be done in channel master? would changing transponder be an option? and how would this be done?

[CYCO]

The channel lists don't match the transpoder values. Make your own current list with cmaster. The NHL tiers change every day.
LuckLarry how do i find the right transponder values? :confused:

[alex5213]

LuckLarry how do i find the right transponder values? :confused:

First of all look at your Disecq switch and remember where each satellite are conected, i recomend 119 at disecq 1, 110 at disecq 2 and 105 at disecq 3, your dish settings must match your hardware settings and your chanel list must match also.
what type of LNB´s do you have ?
what type of switch are you using ?
in which order are conected to the switch ?
what is your dish settings inside installation menu ?

[lsmith]

try factory reset and then blind scan

[CYCO]

try factory reset and then blind scan

I have done that several times

[CYCO]

First of all look at your Disecq switch and remember where each satellite are conected, i recomend 119 at disecq 1, 110 at disecq 2 and 105 at disecq 3, your dish settings must match your hardware settings and your chanel list must match also.
what type of LNB´s do you have ?
what type of switch are you using ?
in which order are conected to the switch ?
what is your dish settings inside installation menu ?
alex I will recheck everthing you said and get back later. Thanks

[skylite]

I was having the same problem, nag, scrambled channel, no information and changed my LNB's from legacy ones to the DP Twin LNB I had sitting around. Immediately I noticed that my signal strength went up 10-15 units on both of the satellites. In addition, the EPG now gets information on 75% of the channels and (before 15%) and I get 2x as many channels. I am now getting around 80 signal strength on my coolsat. I am going to try and change me cable to the underground stuff, if I can find some!

[Dr Zapola]

Where can I find Coolsat Pro v2.2.
ZAPOLA

[calin]

V 2.1 at pantecdvb.com... If you like.