DB
10-28-2005, 10:28 PM
I found a 22khz switch on ebay that I thought I'd give a try. It's like 10 bucks all together with shipping. I read on the myth web sight that it would work so I gave it a try. On the switch itself there is a 22khz side and a 0 hz side. I put 119 on the 22khz side and 110 on the 0 khz side. Just so you know I have a dish pro lnb twin. If you look on the side you will see which one is 119 and 110. I ran two cables into my house cause I was just switching the cable depending on what I was watching. So the switch is pretty close to my cpu. I don't know how well it will work at the sat.
So back to the switch. In my settings I put 119 as committed lnb1 and 110 as committed lnb 2 . 119 The lof1 and lof2 I set at 12500000 and sw I set at 12200000. 110 I set lof 1 and lof 2 at 12500000 and the sw at 12700000. I then restarted myth and it worked. So far I have had no problem switching between sats. If you interested go on ebay and type in sw22 and you will see it there. Also I guess you can use one of those dave dishes that has the three lnbs cause it has a 22khz switch in it. Just use the same settings. I don't have one to try so I can't tell you if it works for sure.
I just want people with kworld cards to know that it is able to work to sats with this switch so you don't have to switch cables with a a/b swich or by hand.
So back to the switch. In my settings I put 119 as committed lnb1 and 110 as committed lnb 2 . 119 The lof1 and lof2 I set at 12500000 and sw I set at 12200000. 110 I set lof 1 and lof 2 at 12500000 and the sw at 12700000. I then restarted myth and it worked. So far I have had no problem switching between sats. If you interested go on ebay and type in sw22 and you will see it there. Also I guess you can use one of those dave dishes that has the three lnbs cause it has a 22khz switch in it. Just use the same settings. I don't have one to try so I can't tell you if it works for sure.
I just want people with kworld cards to know that it is able to work to sats with this switch so you don't have to switch cables with a a/b swich or by hand.