Atmega working in 3100.010

[k0ke]

found files on another site (can't remember the site name as I surf alot, read alot) I followed the intructions, wrote to the atmega, did the edit on the flash, and wouldn't you know it, it works!!!!!!!!!!!! ppv/porn all open I think it's the Tomico fix (not sure of the name)Orininally the name of this file was something like 2594-128 or something.But I renamed it, because I'd prob never remember it's name. Where I did d/l it from did give thanks to a Tomico person

[smilingjack]

Last week he was selling it for $ 150

[rafter94]

found files on another site (can't remember the site name as I surf alot, read alot) I followed the intructions, wrote to the atmega, did the edit on the flash, and wouldn't you know it, it works!!!!!!!!!!!! ppv/porn all open I think it's the Tomico fix (not sure of the name)

share with us

[sukh77]

Here is the file give it a try. http://www.dssftp.com/forum/t51186-n2-atmega-test.html

[vmod32]

What edit did you do to the flash? Do you mean the receiver TSOP? there are no instructions for that...

[sukh77]

The atmega fix comes with instructions. Atmega also requires a flash and eeprom.

I think the mod is the same as rom10.

Atmega file is available at the link above posted by me.

[110º]

4900 / 3900 working here ....

The good old $24 Atmega is ....alive ....!!!!

woohoo ....screw AVR-X ...screw Syndrome ...

[vmod32]

I programed the ATGEMA as per the readme. That went ok, but when I put it in my 2700 I got the msg that the card is not right for the receiver. But it did show it as a rom 102 in the sysinfo. This is the same receiver my rom 10 to 102 is working in... So there is a tsop mod that needs to be done that is differnt than that one.

[vmod32]

110 did you mod those receivers? Am i missing something here?

[110º]

Flash the IRD with the TSOP files (there are 6 at this point..supposedly 9 total ..) ...flash ATmega ....follow instruction..done ..

[rambo41]

Up and running here also on a 3100.........

[Mezlo]

301.010 up and running here.. wide open ppv porn sports

[HuSatellite]

Well, Well, Fucking Well......

Whos the mother fucker who took a bashing from SmilingJack over this subject. Me!

You said it didnt exist, I said it did. There you go..... Freeware for the leaches.

Tomico, was never selling this. So dont even start with that shit.

Your still out of the loop SJ, I told you so... Like i always do...

"Laugh My Mother Fucking Ass off" :cool:

Maybe one of these times you'll listen

[HuSatellite]

Can i get a "Hell Yeah"

:cool:

[Mezlo]

Since I always used TCFD how would you go about getting the locals for my area on the atmega? Was able to edit Penga's script for rom10. Need to learn some new stuff. I always liked my atmega.

Also does anybody know if this is based off the Penga script. Can we change boxkeys and cam id?

[smilingjack]

Until today the only way to get the ATMega fix was to send your IRD, Card and $150 to a dealer.

Just like the clone cards were.

Things change, sometimes real fast.

Now we have to wait and see what charlie does and what holds up.

[rambo41]

This site would never admit to an Atmega working as Mili would only loose money on his so callled AVR-X, simple as that ... Think of all the people who were sucked into buying the AVR-X, bet their some pissed now..... :rolleyes:

[smilingjack]

We always supported ATMega, even after mili stopped selling it.

The ATMega section was here until N1 and all the ATMega's went down then he removed it along with Magic and Rom programming,

I am sure it will come back now that a fix is out for it, just like the Rom section came back

[110º]

HUsatellite is correct .....Tomicco never sell anything .....

These underground coders can really code ....From what I heard they can even write to N2 cam now ....

[smilingjack]

Read at satscams about tomico and his STORE and the accusations about cards sent in for programming being for sale on E-Bay.

Then complain to them about him never selling anything.

[HuSatellite]

Until today the only way to get the ATMega fix was to send your IRD, Card and $150 to a dealer.

Just like the clone cards were.

Things change, sometimes real fast.

Now we have to wait and see what charlie does and what holds up.

So, i guess you never apoligize to anyone do you?
You were calling me a scammer, Saying i was connected to that POS TDG.

I guess i could very well same the same to you, Selling magicians Shitty products again.
Sure you can say "I got a year of Free tv with magic for $150" But how many days did you wait for his fixes ? With zero tv.
3 days for the last freaking key change is hilarous.

[HuSatellite]

Read at satscams about tomico and his STORE and the accusations about cards sent in for programming being for sale on E-Bay.

Then complain to them about him never selling anything.

Well if you knew anything about it, Only one person had a problem.

And they have received Everything back!! I know both parties so if you need further details. Bring it...

[roostaam]

where can I get 3100 Tsop files for this fix...thanks

[smilingjack]

At the time, the referance was to the clones and they were 'a scam' most went dead shortly after purchase and the dealers who canceled the subs for them, offered to 'fix' them again at a reduced price.

You too were encouraging people to buy this 'fix'

As for the ATMegas, until they were taken out of the IRD + CARD + $ 150 arena were also to be considered scams or at the very least least rip off's.

[peter123]

ok i got a 3900 flash.what do i do next,how do i flash it

thanks

[HuSatellite]

At the time, the referance was to the clones and they were 'a scam' most went dead shortly after purchase and the dealers who canceled the subs for them, offered to 'fix' them again at a reduced price.

You too were encouraging people to buy this 'fix'

As for the ATMegas, until they were taken out of the IRD + CARD + $ 150 arena were also to be considered scams or at the very least least rip off's.

i never encouraged anyone, to purchase anything, ever
All i said was that it works....

You called me a scammer recently man, I was the one who said atmega could be done here.

[sukh77]

Come on guys lets stop the nonsense. Lets face lot of people were getting ripped off at that time. And I'm pretty sure no one spoke to mili about getting this tested, so it seemed like someone could have gotten shifted.

[HuSatellite]

10-17 you pm'd me this:

"It seems you just come here to start trouble, spread disinformation, with all those other sites you say you go to why not go cause trouble with them, why come here we have enough ass holes and trouble makers here already."

I guess me saying the atmega fix would be freeware in weeks was disinfomation? Mis leading? Scamming?

It came in 3 weeks, Seems pretty acurrate to me..

[HuSatellite]

Come on guys lets stop the nonsense. Lets face lot of people were getting ripped off at that time. And I'm pretty sure no one spoke to mili about getting this tested, so it seemed like someone could have gotten shifted.

Yeah ill drop it, I just love to shove shit right in Sj's face.

Have fun people, Atmega is free now.... And the source code is there.

Any coder can fix this software up.... :)

[smilingjack]

If we thought that Hu was doing that he would be deleted and banned,

we just had a difference of opinion,

we don't need any help to throw people out.......we have a lot of practice at that..... thanks anyway.

Please do not send nasty PM's to people