2700 stuck on aquiring sat signal after n2 mod.

[guitartom]

a few of the 2700 that i did work great. but 2 receivers keep getting stuck on aquiring sat signal.. any ideas what could be wrong. will having the wrong buid number on the tsop and eeprom do it?

thanks

[nn_nails]

here you go
http://www.dssftp.com/forum/t51396-mod-2800-cant-get-sat-signal.html

[newbie1conobie]

I had the same problem with my 2700. I fixed it by finding a modded tsop with a build configuration the same as mine. Do a search in the public file downloads. The more letters you can match, the better, but I read that you need to have at least the first 2 letters matching for it to work properly.

[tarzen]

I have same program, I updated TSOP and programmed the atmega, it is acquiring sattelite signal for ever, even I do not see the signal strength at installation menu.

[paulandsabrina]

flash edit 01 02 is probably what you got in the data area you need 00 02 that should bring me your signal back let me know if this helps

[DICAT]

I am getting the same problem, acquiring sat signal.
I am using a 2700 Build COPA.
I programmmed my Atmega 128 properly using the hex filem, eeprom file and changed the Lok fuse Bytes.

I then took the 2700-2800 TSOPthat I downloaded and modded the Build number via Flash Edit to match mine and saved it ( I even tried adjusting the Bootstrap at one point). I then took the eeprom and used a Hex Editor to change the Build number and saved it. I then Erased my TSOP in Flah Keys and programmed the new TSOP, I then programmed the new EEpom. No signal!!!
I have tried reversing the build number of the EEprom all no avail. If anyone can help me it would be appreciated. By the way I accidentally lost my original backup of my TSOP, although I still have the original EEprom.

[guitartom]

i got them working.. what i did what use another tsop with the same build # i guess some receivers are fussy about having the right build. mine was CAPD.
this worked in both. CAPD and CARD receivers... build CAPA wouldnt work in either of them.

[DICAT]

Ok I finally got it working here is the solution for me

Went into Flash Edit and loaded the 2700/2800 TSOP changed the Build Number to match mine and modified the Build Data,
My First line Was = 43 41 50 44 00 00 01 02
Changed the 3rd last digit to a zero
Build Data is now = 43 41 50 44 00 00 00 02

[Heebusgeebus]

Will this fix for a bev 2700 with the atmega 128 or is this for a different sat system

[DICAT]

Dish!

[tarzen]

I have changing the last number in hex editor and saved as new flash and and then loaded this flash again. I changed last three number from 01 02 to 00 02 as shown under:

Original 31 35 41 42 4C 37 3B 8A 43 41 4E 44 00 00 01 02 15ABL7;ŠCAND

Changed to 31 35 41 42 4C 37 3B 8A 43 41 4E 44 00 00 00 02 15ABL7;ŠCAND

Problem is same, receiver keeps searching for signal and even there is no signal strength on signal bar under insallation menu. Please help

[tarzen]

I have changed the last number in hex editor (as I do not have flash edit 2 or higher) and saved as bin file as new flash and and then loaded this flash again. I changed last three number from 01 02 to 00 02 as shown under:

Original 31 35 41 42 4C 37 3B 8A 43 41 4E 44 00 00 01 02 15ABL7;ŠCAND

Changed to 31 35 41 42 4C 37 3B 8A 43 41 4E 44 00 00 00 02 15ABL7;ŠCAND

I also prgramed the modified eprom also. And its working now......

I have starchoice 30 in dish with LNB, do some body Know that can I use it for dishnet with out changing LNB. Thanks

[Stocko]

301.010 up and running with atmega again. I read some suggestions/results from a few threads here that did the trick.
hxxp://www.dssftp.com/forum/t51396-mod-2800-cant-get-sat-signal.html
hxxp://www.dssftp.com/forum/showthread.php?t=51806
I ran U22 & U23 through flashedit and changed the first line of the build data from 08 07 to 00 07 and erased flash 1 & 2, then re-flashed ird with the modded scripts. Thanks to those that posted what was working for them.
Stocko:cool: