finally got it

[popo]

after three days of trying to program a 301-10 i finally got it . The program really works i used (amega n2 all in one) you got to try and if it don't work try again.........good luck :)

[rykrishell]

after three days of trying to program a 301-10 i finally got it . The program really works i used (amega n2 all in one) you got to try and if it don't work try again.........good luck :)


how did you do it im having trouble with mine all i get is black sceen but i do get ch 101 with video ok i must have missed something :(

[SLIGHTBUZZ]

i am also haveing problems keep geting errors when i try try wright flash back to rid

[dishi]

Hi POPO
I tried the Atmega all in one. but all the chanels are red and ask for purchase. How do I get the proper tiers for this using 301-10?

[popo]

I,m sorry i can,t answer all questions I,m a newbie at this but the only thing i did was find a 301.10 tsop with different (build configs)..........My reciver build is a EAEA but i used a EAFA and it work.

[udntcme]

Don't try and make it too difficult sound's like many are haveing to same problems.Here are some thing's to look for (depending on your ird , a complete erase of tsop and flash with the one for your ird (build does not have to match exactly, or even close) just try it ,you can alway's re-flash if you save your orig tsop. Dont be scarred, If your useing a reg 13 (single) these can be a bit more difficult.READ, Fuse bytes= FF EA 89 FF some files around suggest to use "FC" as the first byte don't use this (It will lock your atmega)...well that about it...! Keep trying...all you should have to do is flash tsop after eraseing, flash saved eeprom after a easy rebuild with "Wiem" -(Wonka)... to make sure password lock is set as you want it . Here is the secret...Just make sure your bk's and ird #'s are the same on both "Atmega and tsop" .......

[udntcme]

Here's some more ..Make sure your useing the correct j-key's this is important...!!! you can make a "saved eeprom" by selecting "Apply script" in j-key's. All the rest is prob a "hardware situation" (jtag not connected properly) bad Atmega (dog got at it)...hehehe...ect,ect,ect...all the best ...Hope this may help someone...Keep at it...!!!

[rykrishell]

i am also haveing problems keep geting errors when i try try wright flash back to rid

Can anyone tell me what i need to do to fix this problem Lsi control unavailable when trying to flash receiver 301.10 :cool:

[udntcme]

Do a search for " reserecting your IRD" this is what you need to do.

[bobsmith161]

Can anyone tell me what i need to do to fix this problem Lsi control unavailable when trying to flash receiver 301.10 :cool: ok the jtag & or jkeys may have been unpluged or restarted after flash was erased?
if so what you need to do is click ok past all the lsi shit and so on then erase both flash 3 times each then program the 2nd flash to 6000 bits with slow countrol or what ever you can get to work unpluge the 301-010 wait 20sec. plug in start jkeys then erase both flash 3 times... ok now program the 1st flash the the sec. flash then the eepron.... this is one of meny way to fix the 301-010 that has worked for me when i had the same problem:)

[udntcme]

Correction typo= Fuse bytes "FF AE 89 FF...sorry....

[frank detrolo]

having the same problem. I get 101 and 103(ppv preview) but the rest of the channels are black??? does anyone know the case??