BEV Atmega [Archive] - Mili's Marauders

dm_4u

11-25-2005, 08:54 PM

Does anyone have a 3100 working with an Atmega...or is this something that won't happen anymore?

ghost1412

11-25-2005, 09:10 PM

I would lik eto find out as well have same combination and waiting for solution

Teppy1954

11-25-2005, 11:13 PM

Does anyone have a 3100 working with an Atmega...or is this something that won't happen anymore?

I have a 3100.010 working on Atmega for Dish. I have been told that Bev Atmega is in the works but not perfected yet.

PS I cheated-I did not have equipment to J-tag anymore so my dealer changed my TSOP and programmed my card for me, guess I'm gonna have to get another J-tag!

smilingjack

11-25-2005, 11:27 PM

When I find some BEV conversions I will post them, it is just that no one has posted any yet

burnt_servo

11-26-2005, 12:31 AM

so if i'm understanding this corectly , there was a loophole with dishnet that didn't allow then to use the full encrytion , thus the eventual hacking of dish .

but now that bev is hacked , does that mean that n2 is now beaten ? because i'm assuming that bev is using the full n2 encription .

are dish and bev still able to send down ecms ?

i've had dishnet up for almost a week now :) :D

smilingjack

11-26-2005, 12:40 AM

Dish was hacked using a workaround to emulate 101 with rom10 when the 101 was dumped and they got the keys.

102 was still a mystery and another level UP the ladder so it could not be used with Dish or especially with BEV which never used 101. No Bev.

Now 102 has been dumped and dish & Bev 102 TV should be available as long as they are used which should be a long time.

What they will come up with in the way of key changes and ECM remains to be seen.

Crow 492

11-26-2005, 08:29 AM

Jack you are the man!!!!!!!!!!!!

beetho

11-26-2005, 04:02 PM

So if i understand the tsop change is not working for bev now !!!!!

burnt_servo

11-27-2005, 02:14 AM

So if i understand the tsop change is not working for bev now !!!!!

there is suposed to be something working for bev right now , but we'll just have to wait till someone releases it . till then we can turn our dishes to dishnet and watch some tv :)

smilingjack

11-27-2005, 02:20 AM

Rom 10 & Atmega Is Working For Bev

bevnut

11-27-2005, 05:21 AM

were can we get the program for atmega for bev because i cant seem to find it anywear...ty

hatton

11-27-2005, 06:50 AM

I would also appreciate a link in this thread to the files/instructions on getting BEV(N2) working with atmega. I think I read somewhere that I can find them where Penga hangs out, but I have no idea where that is.

Thanks all,

(I'm sure the ones that have atmega/bev working are too busy/happy to post the files/help/provide instructions. I will wait patiently.....)

skinerd

11-27-2005, 07:36 AM

hatton

11-27-2005, 09:11 AM

I have a 3100

nace

11-27-2005, 12:46 PM

Hello..

first excuse me for my english i speak french.... :rolleyes:

I is right that atmega working for bev? then if yes............... or not..

what is the difference for work between atmega et rom10?

if atmega work.. i'm 3100 ird and 2700 ird.. what file i must use for program atmega card... and soft...

thanks..

Nace

bubz24

11-27-2005, 03:57 PM

I've been on a couple sites this morning and there is no confirmed release of a Atmega hack. Only fta's, dvb's and rom 10's at the moment.

Check back tomorrow and you'll probably see something. No one in this thread has confirmed anything so there's no use asking for something.

Regards,
Bubz

lyngatan

11-27-2005, 08:30 PM

Rom 10 & Atmega Is Working For Bev

HI Smiling Jack...can you please give us info where to get the Atmega file for BEV...

Regards.....:)

spike

11-28-2005, 12:17 AM

HI Smiling Jack...can you please give us info where to get the Atmega file for BEV...

Regards.....:)

please!!

burnt_servo

11-28-2005, 01:07 AM

There you go and it's all there: http://www.dssftp.com/forum/t51421-atmega-nagraii-fix-for-301013-single.html

thats the fix for a 301.013 single tsop reciever , for DISHNET .

what the people here are looking for are the files for an atemga for bellexpress ( ie 3100 = bev , 301 = dish , same reciever , different programing ) .

Satan

11-28-2005, 01:24 AM

check out worldsatellite dot tv ...tell em I sent ya..and you might get a free prize.....LoL...

ruciz

11-29-2005, 05:21 AM

that site is garbage, checked it out and it contains no more info on anything that I can see.

tamadrum

11-29-2005, 06:18 AM

Went through it with a fine comb and found it useless for BEV. Any fix or progress for BEV 2700 & Atmega yet? Would the Penga fix work for BEV?

ruciz

11-29-2005, 02:24 PM

the penga fix works for bev, but its Rom10 not atmega. Anyone know how to fix it up for atmegas?

bubz24

11-29-2005, 04:23 PM

Still nothing as far as I can see. Just keep being patient, it will come soon enough.

11-29-2005, 04:31 PM

There is a BEV atmega fix. I have seen it at another web site. I downloaded it. If you want bubz24 pm me and I will tell you where to get it.

tamadrum

11-29-2005, 04:42 PM

Thanks dog breath....a pm request is on the way from me also

tamboy

11-29-2005, 08:41 PM

can you please tell me where to get the files i need the tsop ang the atmega file please.thank alot....

citrus13

11-29-2005, 09:00 PM

hey SJ..... so should i set up my Bell now??
I've got a 501... can I set up with my atmega??
If so, is it the same as it was before??

thanks

11-29-2005, 09:29 PM

I don't know if I am allow to say the web site so if I 'm not sorry and delete it. but it is at hashhu. So every one can stop pm'ing me

citrus13

11-29-2005, 11:01 PM

ok... i've been reading and it says it's working... but others say not??
can anyone tell me... is it atmega or a rom10/102???? and then what??

I have my pvr in a box and don't even have my dish up since i've moved....
so with B3V... what do i need to do????

thanks....

lyngatan

11-30-2005, 12:28 AM

With BEV only the rom10 for now.
With Dish, rom10 and atmega.

citrus13

11-30-2005, 12:31 AM

With BEV only the rom10 for now.
With Dish, rom10 and atmega.

thanks for the info..
so with the rom10....
what do i need to do, besides putting up my dish (as i've moved and since haven't put it up again).....

what's the process??

thanks..

lyngatan

11-30-2005, 12:37 AM

You have to change the tsop(s) in your receiver and the eeprom.
Make a backup of those first.
Then you get on this site the tsop(s) and eeprom needed for your IRD.
And also a clean BEV rom10 image and penga's patches(2) to unlock BEV.

lyngatan

11-30-2005, 12:42 AM

i have uploaded what you need for your rom 10.

change the extension TXT for ZIP

citrus13

11-30-2005, 05:34 PM

so can i use my iso to program then??
also... what about the tiers and such???
or are the penga's patches opening up all channels??

the Rom10txt. above.....in notepad it's just a bunch of jibberish...
is this for the iso??

lyngatan

11-30-2005, 05:45 PM

return to my post above and read carefully...

cronic

12-01-2005, 06:18 PM

Rom 10 & Atmega Is Working For Bev

If the atmegas are working why can't I find the pfg.

Thanks

lyngatan

12-01-2005, 06:25 PM

Here it is. change the extention txt for rar

lyngatan

12-01-2005, 06:27 PM

And as far as I know, there are no atmega fix for Bev

SAMBUCA6

12-03-2005, 08:04 AM

whut does this work or is it WASTE OF TIME I KNOW "TESTING" IS A HOBBY BUT

big big

12-04-2005, 02:17 AM

Rom 10 & Atmega Is Working For Bev
OK WHERE IS THE FIX FOR ATMEGA BEV.

lyngatan

12-04-2005, 02:18 AM

there is no fix for Bev/atmega...

hatton

12-06-2005, 06:22 AM

I've posted a file I've come across, not sure where I got it.

I'm not trying to scam anyone, I'm just posting in case it helps.

I'm running dish fine so no use to revert back to bev.

Rename .txt to .zip.

Please post if it helps..... Please delete if it is not helpful.

Geoff