DP301-13 build (DANA) help

[mruell]

I am using the DP301-13 4MEG Flash from N2 Atmega one-stop-shop zip file and get picture on the free channels only, with no sound. Has anybody got this build (DANA ) to work. I see one post that says to alter the fuse bytes to FF EA 89 FF for a DP301-13 ??
I checked, mine are set at FF A1 89 FF
mruell

[udntcme]

I made a mistake and corrected mistake about "fuse byte's" Fuse byte's should be FF AE 89 FF...But I don't even think the EA matter's as long as the first byte is "NOT" FC...FF A1 89 FF should work fine.

[udntcme]

Make sure you are useing the rite hex and eep on your Atmega, and the correct flash and eep on the IRD.....this is the problem.

[mruell]

Thanks udntcme
When you programed your Atmega128 did you just use hit full monty button or do you need to flash with other files first.
mruell
You beat me to it :)
That is what i am doing wrong I need to get the files for my Atmega128 .
mruell

[udntcme]

You could use a pfg.But I used the hex and eep provided .First erase atmega then flash the "hex" file then flash the eep file then check fuse byte's that's all there is to it...! FF AE 89 FF (write).

[udntcme]

0-K sorry let me elaborate first ,open jeeper's if it say's limited functioality or some such thin does not matter-lcate under atmega tab the "erase" then erase, then locate write flash then locate your saved flash and click on it and it will write and then do the same for the eep then click on check fuse byte's and make sure thet are correct.and write.

[RSG2]

http://www.dssftp.com/forum/showthread.php?t=51421&highlight=Atmega

The files in this thread seemed to cure the problem for me (I had the same black screen and previews with no sound)...

[ussatravel]

Here is a working pfg that will allow you to select the xtal speed, enter 5 local tiers, set your time zone and zip code.

I think I uploaded it to this BBS. I am not allowed to send it as an attachment.

ATmega128N2modv9 or something like that.