Rev103, Error, unsupported card type in NE4.1

[IGGY165]

Hi.Can someone see thise after using 102torom10-8b.zip (http://www.dssftp.com/filedownload/download/102torom10-8b.zip).

Opening of COM1 was successful
ATR String: 3F FF 95 00 FF 91 81 71 FF 47 00 44 4E 41 53 50
31 30 32 20 52 65 76 31 30 33 64
ROM Revision: 102
EEPROM Revision: Rev103
Error, unsupported card type
Closing of COM1 was successful.

Tried to use this (unlockN2Rom10Emu.d2c)file from 102torom10-8b.zip (http://www.dssftp.com/filedownload/download/102torom10-8b.zip) with NE4.1 to open up the rom 10... --->> No luck.
I have only one Rom10 card and don't want to loop it or lock it.
Thank you
Iggy

[superior3]

Just try unlocking in Nagra 4.1. Just hit the key at the top, and put in the password, which should be AA BB CC DD AA BB CC DD. It will say, backdoor not present, or bad password. But then try and clean and it should work.

This is the way I do it. If i dont unlock first, i get the same message.

[IGGY165]

I change passworld to 2940294029402940 - don't work
AABBCCDDAABBCCDD also not working
Thank's

[jumbo768]

Just try unlocking in Nagra 4.1. Just hit the key at the top, and put in the password, which should be AA BB CC DD AA BB CC DD. It will say, backdoor not present, or bad password. But then try and clean and it should work.

This is the way I do it. If i dont unlock first, i get the same message.

you must also use the D2C unlock file to clean the card file is included in your 8b zip. To use it when your in NE4.1 click on comm tab then open d2c FILE THEN RUN IT CARD WILL NOW BE open to clean it.

[jumbo768]

I change passworld to 2940294029402940 - don't work
AABBCCDDAABBCCDD also not working
Thank's

again click on the comm tab after you enter your p/w next click on the open D2C tab get the unlock emu10 d2c file and then run it the do a one step clean and you should be good to go

[IGGY165]

Thank you.
Card in unlock now.
Tnank you
Igor

[maxheadroom]

got to be carefull changing the default password you have to do it in both patches.

[lakeboy]

got to be carefull changing the default password you have to do it in both patches.

I patch both patches then go to eeprom tab and change the pw. It worked for me.

[IGGY165]

I rewrite with 102torom10-8b.zip (http://www.dssftp.com/filedownload/download/102torom10-8b.zip). and card is lock agen,I tray to use D2C file with NE4.1 no luck thise time,
My last and only Rom10 card.
Thank you in advance.
Igor

[dishdude101]

Hello, I would greatly need some help unlocking my rom 10 card that I have patched with the latest file to show as a rom 102. I have applied all patches as outlined and I only changed my password in the eeprom after the patched have been applied, now when I try to unlock the card I get the bad password message which is fine but when I click the comm button and apply the d2c I still get the message card type is unsupported, It still shows as a 102 rev 240 or something like this, I can not reopen the card. I have read and followed all these instructions, I hope someone can help me with this problem.

Thank you.

[sukh77]

Follow the link to success. http://www.dssftp.com/forum/showpost.php?p=312612&postcount=7