free 3M is out for rom 101 ! [Archive]

towboattrash34

11-30-2005, 07:12 AM

it was not free.....it was took from tomico......lol.....it is the same script that them/cooldish/toybox were selling.......and that many had cards done

sukh77

11-30-2005, 07:19 AM

OH poor tomico. Free it is.

madiany

11-30-2005, 08:17 AM

can you post it so we can try?

sukh77

11-30-2005, 08:59 AM

You know the procedure. rename to .zip
Box keys: 8C A6 A8 8C FD E2 E2 63
IRD #: 01 1C 74 6C

cipher44

11-30-2005, 09:13 AM

Will an ISO programmer work? Or do you need a modded loader?

sukh77

11-30-2005, 09:33 AM

ISO will work. After you unlock it with modded loader.

sukh77

11-30-2005, 11:26 AM

Wrote the image to card. But got message incorrect card. Which is correct cause the IRD# on card shows it is:02 42 22 4C
But the one it says to program for is :01 1C 74 6C

Will try to use the one showing on card and will update.

sukh77

11-30-2005, 12:08 PM

alm4r

11-30-2005, 02:01 PM

tooked from Tomico ? or released by Tomico...
at least give the credit where is due, first released like 3m101autorollimage,
and renamed Total blabla,
Thanks Tomico if you released, at the end is your work released or not.

Dave411

11-30-2005, 06:45 PM

The correct IRD# is = 02 42 22 4C
Got video on free channels and ppv says they are purchased. All other channels are available also, but says smart card not does not have authorization. Like it need new keys or something.

Same for me. I then went back to the 101 bin and changed the IRD# and rev IRD# in the bin to match the original IRD#01 1c 74 6c and changed receiver to match as well. Same result - video on free channels, not authorized on all other channels.

sukh77

11-30-2005, 07:42 PM

Its definetaly not autorolling. Left it on channel 500 like we used to the whole night for the keys to update, but nothing.

lightning0009

11-30-2005, 09:15 PM

Ok, I have it working, but I dled it from somewhere else called dishnewbies just because they had it there and they said it was working there. It's the same thing I assume because the ird and boxkeys are the same and I programmed up this 4900 and I am watching a ppv movie right now with it.

Dave411

11-30-2005, 09:39 PM

Its definetaly not autorolling. Left it on channel 500 like we used to the whole night for the keys to update, but nothing.

Did it stay at rev007 while you were streaming it? I was worried about getting updates to the card. Thanks for your help.

sukh77

11-30-2005, 09:48 PM

Its working. The above file is missing something.
Use the original IRD# on this file.
Same boxkeys.
Thanks for the work whoever they are.
Everything is working. I didn't go through all the internationals, porn and ppv is working.

mili

11-30-2005, 09:51 PM

Please upload files to the files section. Do not rename them text or JPG to get around the restrictions here.

mili

sukh77

11-30-2005, 10:03 PM

Sorry.

Did you move the files to the files section or deleted them?
I was trying to post it there but it say'd already there.

lightning0009

11-30-2005, 10:07 PM

I uploaded the 3m and then I uploaded the text readme just now.

lightning0009

11-30-2005, 10:10 PM

I just checked the system info and card rev is still at 007.

Cimba

11-30-2005, 11:26 PM

What did you call the file ?

Cimba

11-30-2005, 11:38 PM

ISO will work. After you unlock it with modded loader.

Do you have to do the unlock part with a modded loader if your card is at rev 007 ?

Pyotr

11-30-2005, 11:58 PM

So,in order to use my 101,I need to buy a modded loader now? Crap,I used to have two hu loaders.Sold 'em when P4 crack never came. Oh,well can't afford another piece of equipment.
BTW,will this 3m work on a never subbed 101 007?? Looks like it's some kind of sub clone but not quite(open PPV's).

lightning0009

12-01-2005, 12:04 AM

yes i had to use my modded kickass clone to unlock my rom101 at rev007 and install the command 48 intercept. I used newd11 flash and the rom101 xvb reader script. I uploaded the 101-3m.bin file as a bin. I see there is one there as a zip. Mabey milli zipped it.

jaydar

12-01-2005, 12:56 AM

These files are are in the public download not the VIP download. How come?

mili

12-01-2005, 01:09 AM

It is in the ROM10X section.

mili

jaydar

12-01-2005, 01:26 AM

Sorry milli but I just logged in again nothing uploaded on the 30th

sukh77

12-01-2005, 01:42 AM

The old file doesn't have the autoroll or its missing something, also the IRD# is incorrect.

The new file I uploaded works. Yes you have to unlock with modded loader.

jaydar

12-01-2005, 01:54 AM

This is the last file I see in the VIP section 102to10howto.zip (http://www.dssftp.com/filedownload/download/102to10howto.zip) Nov 28. Is it just me having this problem?

Pyotr

12-01-2005, 01:57 AM

The old file doesn't have the autoroll or its missing something, also the IRD# is incorrect.
The new file I uploaded works. Yes you have to unlock with modded loader.

Wll,that just sucks. Funny thing is I tried to cover my bases by getting the
Nexus-X dual crystal(3.57mhz and 3.68mhz) loader. It has jumpers to switch between the two,but I don't think it's flashable. I'll have to open it up to see if it' got an atmel.Anyway,I'd probably break it yrying to mod it so maybe an ISO only version will come out.

sukh77

12-01-2005, 02:22 AM

I didn't know the public section files were different from VIP files section.

lightning0009

12-01-2005, 02:26 AM

As milli said, it's in the rom10x section of the files section, not the echostar files section. On my puter I have to scroll down to see the rom10x section on the left. The one I uploaded is there, I just checked and its the one labeled working here.

towboattrash34

12-01-2005, 05:46 AM

listen guys.....itis their ird and cam..since it was stole from tomico he will shut it down,if not then dish will....but u might can use your good cam id/box keys/ird info to get it back up...not for sure on that

#40Fan

12-01-2005, 06:19 AM

Yeah, if this is a clone, then it can be taken out easily. If the Cam ID and Box Keys can be found in the 3m and changed, then you might be able to make it last longer.

#40Fan

12-01-2005, 06:27 AM

What is the Cam ID being shown on the screen when you hit the info button? I have found where the IRD # and Box Keys are located so they can be changed. If I could find the Cam ID, I am sure that it could be changed as well. Changing this could eliminate an ECM problem.

IRD # starts at 199F.
Box Keys start at 10D0.

Faust

12-01-2005, 06:35 AM

topil

12-01-2005, 08:16 AM

#40Fan

12-01-2005, 08:25 AM

What is the Cam ID shown in the System Info Screen???

sukh77

12-01-2005, 08:31 AM

#40 - If you saved your original file then you wouldn't have to worry about the camid. All you would need to do is change the IRD# and Boxkeys.

So you gonna let us in on the secret on where the boxkeys and iRD# are.

Unless tomico works for dish, I don't see how he is gonna shut this down.

#40Fan

12-01-2005, 08:33 AM

I posted above where the Box Keys and IRD # were. If the Cam ID doesn't change, then changing them should help. But if the Cam ID does change, as in a Clone, then finding it (Cam ID) might or probably not, help.

That is why I want to know what the Cam ID is.

#40Fan

12-01-2005, 08:35 AM

Also, the address of the Box Keys and IRD number are where they are located in the 3m when opened in a Hex Editor.

sukh77

12-01-2005, 08:44 AM

Mili is outstanding. He just increased the download limit way the heck up there.3

CamID is S00 6043 6852 or 39A3174

#40Fan

12-01-2005, 08:54 AM

Found it. 0098 when opened in a Hex Editor. Everything should be changable.
Sukh77, if I were to send you a modded file to work on a receiver that has different Box Keys and IRD # and my own made up Cam, would you try it and post back? If so, PM with Box Keys, IRD #, and an email addy.
Mili upped the Download limit to make sure the VIP's can download while the VIP login is disabled. Upgrading server.

sukh77

12-01-2005, 09:01 AM

Ok now we can marry the card to the reciever. But now I get card not authorised.

#40Fan

12-01-2005, 09:03 AM

What were you trying to do? Change the info?

sukh77

12-01-2005, 09:05 AM

Yup changed the info. IRD# and Boxkeys. I guess we need the rsa keys or something.

topil

12-02-2005, 02:37 AM

this is soooooooo weird, heres what i have done, when the 101 dumper came out i read a few cards and try to search the address for ird# and boxkeys, easy because i always keep information of the original recievers information, i find out that the ird# match but i didnf find the correct boxkeys (by the way the recievers were 301.013) now i tried to change the ird and boxkey information on the 3m 101 to match a 2700 and appears a not authorized message, so can somebody really say that, at this moment a fix can be done usign our own reciever and card information without modifying the ird?

sukh77

12-02-2005, 08:10 PM

What are these files suppose to autoroll, I don't get it. Channels 200,300 are black like every other rom.

#40Fan

12-03-2005, 02:47 AM

No, the Rom10to102 will not autoroll.

*Edit: Clearing thinking of something else with the above statement.

I don't think that the 3m will autoroll either.

joesnuffy

12-03-2005, 04:22 AM

Sukh77,
I need a little help. I loaded the 3m you posted in the public files area. I also followed your instructions on changing the box keys and putting the check in crc. I am getting the error message on the tv screen like when a card is autorolling but it never does. Do I need to apply a script to my reciever which is a 2800 or change the keys somehow on the 3M?

Thanks,
Joe

joesnuffy

12-03-2005, 05:18 AM

I figured it out. I just needed to use the P834 without any mods other than changing the box keys and ird number. One thing I did notice is that mine is working on channels 300 and 302 also. What is weird is I just checked the rom 10 and it is also getting all 300 channels. 10 pm est.

Joe

#40Fan

12-03-2005, 07:52 AM

Those channels did come back. Expect the change soon.

sukh77

12-03-2005, 08:50 AM

Yeah, that should be expected. Wonder how the subs can handle key change on 2 or few selected channels.

The autoroll, I was talking about the 101 files. Not the rom10 to 102.
Atleast 1 of these 101 files said autoroll, but none do. Wonder what they autoroll.
Also if these were clones of a subbed card, then shouldn't the 101's keep the keys rolling.

joesnuffy

12-03-2005, 04:07 PM

I am running the 101 3m also and will also post findings. I did put my digital lock in the lock position hopping if they do attack receiver through the generic cam it would keep the receiver stable. Maybe if they change more than a few channels it will autoroll that would be awesome. Just a thought, since dish is trying to autroll those specific channels first those channels may be the problem channels that aren't autorolling on most cards and if they change the bulk of the channels they will autoroll. Time will tell.

Joe

DrSagan

12-04-2005, 04:19 PM

The newer key was sent down weeks ago. All Dick has to do to implement the new key is change the key select byte in the ecm, which he did on a few channels then switched back. This does not affect subs. Put both keys are your card in the right dt06's.

hdeliz

12-05-2005, 12:42 AM

It works, but how can I add tiers on rom101?

janej15188

12-09-2005, 02:53 AM

I need some information please. I have modded my 3900 receiver for this program but in the mean time I couldn't unlock my Rom10 RevA24. I just received my modded T911 and it unlocked in about a minute. The problem know is that I don't know what I am supposed to do with this file to write to the card. I think I need a file to first write to the card to make it a Rom 101. If this is correct, which file do I need and also do I change the IRD # and BOXKEYS for the patch to the card. I am a little confused. Please, any help would be appreciated.

sukh77

12-09-2005, 04:23 AM

This file will not work on your rom10. This file is for rom 101.

You need rom102 to rom10 file available in the files section.

janej15188

12-09-2005, 05:04 AM

Isn't there a file to convert the Rom10 to a Rom101?

janej15188

12-09-2005, 05:05 AM

Isn't there a file to convert the Rom10 to a Rom101?

lightning0009

12-09-2005, 05:33 AM

There is a file to eumulate a rom102 on a rom10. Read, read and read some more then try. I had to reprogram my 101 after dish changed the keys, it did not roll. I'll upload the file I am using now and it is working for a rom101.