How to upgrade IRD 310-10 for N2? [Archive]

View Full Version : How to upgrade IRD 310-10 for N2?

vimalp

12-14-2005, 07:57 PM

Hi all,

I have 310-10 receiver and atmega card.
I am looking for all info to make it working again with n2.
I have jtag. also i have flash editor / jkeys.

somebody please shade some lights on this.

Thanks in advance

12-14-2005, 08:26 PM

Download a tsop for your receiver from the tsop bank. Make sure it is for the atmega. There is some for the rom10 so look before you download. Open it in flash edit and change the build to yours if you can't find your build. Then save . For the eeprom open the tsop you just saved in flash edit and save as virgin eeprom. Flash to receiver. Then hook every thing up but the cable to the sat. Let it sit on looking for sat signal. Then after 2-3 minutes hook up sat feed and bam tv. Don't ask why about the not hooking up the sat feed right away I have no idea why but that is how it is. Good luck

Maknojia

12-16-2005, 04:44 AM

can you give us instruction how to flush programm in to receiver?
I have Jtag,cable atmega,Ird.

12-16-2005, 04:50 AM

Open jkeys. Go into flashing program. Ersae flash2 (c23) then program. Erase flash1(c22) then program. Then go into eeprom programing and program eeprom. When you do the flash do not ersae both at once. Do it in the order I told you.

12-16-2005, 04:53 AM

This is for the 301-010.

Ringtailedlima

12-16-2005, 05:12 AM

I would like to program a rom for my 301-010 which is currently subbed running N2. Do I have to reprogram flash 1 and 2 or can I just reprogram the eeprom with the boxkeys etc.

12-16-2005, 05:26 AM

I would like to program a rom for my 301-010 which is currently subbed running N2. Do I have to reprogram flash 1 and 2 or can I just reprogram the eeprom with the boxkeys etc.Yes both have to be flashed and eeprom. What fix do you plan on using. Rom10 you have to flash a modded tsop ,but there is one you can just change the ird and bk info. Atmega you need the modded tsop, Rom102 you need to change the ird and bk info. Any way you slice it you have to flash both tsop and eeprom.

Ringtailedlima

12-16-2005, 05:32 AM

Haven't decided I have open rom 10's, 101's, and a 102. What would you suggest?

vimalp

12-16-2005, 01:43 PM

Hi all,

Thanks for your response.

I have downloaded 2 tsop file for U22 and U23. both is for EAEA build. I have EAED build configuration. I'm not sure Should i used this TSOP file?
one more thing, EPROM file... I have no idea which and where i can find it.

I will appreceate If someone please post it here.

Thanks a lot,

12-16-2005, 01:57 PM

You cane change the build conf. with flash edit. Also for the eeprom open the tsop with flash edit and save as a virgin eeprom and that is it all set.

skinerd

12-16-2005, 02:23 PM

You can't change the build config by just renaming it..it remains what ever it was, just renamed. If it works renamed, it will work without renaming, if it don't work, then renaming it won't make it work.

vimalp

12-16-2005, 04:53 PM

Thanks dog breath!

okay, I got tsop with EAEA config build and i can edit it. But I'm missing one thing and that is FLASHEDIT utility.

someone please provide me link to download it.
I tried to search in download area but so far no luck :(

Please someone post the link here, I appreceate all your inputs to help me get my IRD back ON.

TIA, (Thx in advance)

DoubtingThomas

12-16-2005, 06:15 PM

Is there no how to showing the steps required to create a modded TSOP for N2 from a back up image that is at the correct firmware? I know there is one for the 2700/2800s but I have yet to see such how to for the 301.010s. Everyone tells one to use a modded TSOP from a bank. Well how did these TSOPs get modded in the first place?