SetIFS failed

[lbartley]

Anyone know what the heck Im doing wrong. I apply the d2c file and unlock the card. I do a clean which goes to 97% and thats it. I open the 102toRom10READY.BIN.bn10 edit the keys open the patch test the patch and run it then write to the card and this is the message I get. I have tried the card in the receiver and all I get is card is not authorized for this receiver. Does anyone know the problem?
Lee

SetIFS failed
Restart in progress
SetIFS failed
Writing ROM10 failed
Closing of COM1 was successful

[Crazy1_79]

first off your 97 percent is not how well the card cleaned, that is the efficiency of which it cleaned, it cleaned 100 percent of the card but it had to restart or retry which is why you get the 97 percent. Don't worry the card is fine, I also have 3 or four cards I have been getting the set ifs failed error. but if you reset the card after doing that and you see it's ATR as rom 102 rev 103, then stick it in the receiver, it will work, and you will still be able to get back into it when you need to change anything on the card.

[6speed]

I got that when trying to edit the keys on the bin file.

I went back to the original files steps and just updated the Keychange patch

I just put in this line alone:

$D863=AF0CBD48D8516DDCFE44D60CA36E5942

Everything went well...

Anyone know what the heck Im doing wrong. I apply the d2c file and unlock the card. I do a clean which goes to 97% and thats it. I open the 102toRom10READY.BIN.bn10 edit the keys open the patch test the patch and run it then write to the card and this is the message I get. I have tried the card in the receiver and all I get is card is not authorized for this receiver. Does anyone know the problem?
Lee

SetIFS failed
Restart in progress
SetIFS failed
Writing ROM10 failed
Closing of COM1 was successful

[Zim]

whare you using it on a modded tsop?
or with just (cloned) diff. box keys and id