stuck on aqquiring signal

[FireNeg]

Hi trying to run bev on a 2700 CATA , cemu is working great on my 3100 but when I put my avr in the 2700 I get stuck on signal and cemu dosent roll put it back in 3100 and it starts rolling and tv come on. Tried 2 different bev n2 modded tsop cata but nothing works , can someone help please. Thanks

[BiggerBear]

Try this -
Unplug the receiver turn off the computer.
Insert the EMU plug in the receiver.
Boot the computer. Don't pull the Emu and see if it comes in. It takes my 2700/2800 about 5 min.

[cancom]

Maybe you have some bent card socket bins from that fat AVR pc board.
It happens all the time!

[FireNeg]

Thanks. That is all done, with no result, got even another 3100 and a 4700 working on same set up but tried another 2700 with the same as my 2700. Any other idea anyone. Thanks

[110º]

Thanks. That is all done, with no result, got even another 3100 and a 4700 working on same set up but tried another 2700 with the same as my 2700. Any other idea anyone. Thanks

The problem lies in your TSOP ...even though you grab a matched mod tsop ....it's got a few things in there that does not match your build ....

try here ..

http://www.dssftp.com/forum/t52526-stuck-on-acquiring-satellite-signal-.html

In Flashedit ..the info under data config or build (something like that) of your OLD tsop....must match the mod tsop ..if not it'll just sit there acquiring signal ..

[FireNeg]

Thanks 110 everything in the tsop matches, but when you edit eeprom in flashedit 2.1 at the fix crc box do we put a check or leave it blank????Thanks

[greypower]

Make sure the last 2 bytes in the first line of your build data are 00 02.

[FireNeg]

Thanks a million times greypower I had 01 02 now its working. 5 days of seaching and trying everything. Thanks again

[rubberman]

i had 01 02 in the first line so i changed it to 00 02 saved and exited. i wrote to back to the ird and it wont power on. the light will come on for a few seconds when inserting the dummy card but thats it.

[FireNeg]

you can try to unplug receiver and scratch the 2 prong of electric cord under your receiver and then retry I had to do that after the last key change . It must take some static out of receiver

[rubberman]

didnt help.

[smilingjack]

He must have had his MO JO working

That sounds like VODOO to me

hehehe

[rubberman]

43 4C 46 41 00 00 00 02
50 00 00 00 01 00 00 01
00 00 00 00 00 00 00 00

thats the build config i edited it was 01 01

[rubberman]

we arent talking about the eeprom image are we? cause i have a eeprom image and Tsop image. the eeprom image i cant even open in flashedit