lifetime ultra

[pollo]

I was just woundering if there a fix for bev cause i dont see nobody
talking or asking about it

[calin]

Yes, there is a fix for that, with autoroll, I do not remember right now which bin is that...

[Ultra Newbie]

JUst wondering if there is a downloadable DISHNETWORK bin file fix yet for Fortec Lifetime Ultra FTA Receiver? Have not seen one since it went black about 9:45 PM E.S.T. on Dec 28th!
Thanks and keep up the good work!

Ultra Newbie....

[tigert422]

JUst wondering if there is a downloadable DISHNETWORK bin file fix yet for Fortec Lifetime Ultra FTA Receiver? Have not seen one since it went black about 9:45 PM E.S.T. on Dec 28th!
Thanks and keep up the good work!

Ultra Newbie.... I am presently using the bin file in the public download section of this forum without any problems
Quote:
16. 2005-12-23 15:09:00 fortec_ultra_2004_autoroll-dn+bev.zip Lifetime Ultra AutoRoll 2004 Models only. Got from another site and it works
UnQuote:

Also get more info from this location http://www.dssftp.com/forum/t54456-lifetime-ultra-autoroll-2004-model-only.html
Have a Great Day!!

[pollo]

Thx Tigert422 Nov 2004 Model
And Now It's Fuck Top
Hope You're Happy

[calin]

I Said that there is a bin (autoroll for Beverly) I did not mention for DN, that file kill some 2005 Fortecs (bad chip combo) and some 2004 months (if I remember well, some Sept., Nov and Dec)!!! So, my friend, time to JTag!!!

[goldenbirdqueen]

I Said that there is a bin (autoroll for Beverly) I did not mention for DN, that file kill some 2005 Fortecs (bad chip combo) and some 2004 months (if I remember well, some Sept., Nov and Dec)!!! So, my friend, time to JTag!!!
Hi calin could you tell me which bin that I should download to my lifetime ultra receiver so I don't kill my receiver.. Thanks for advance and wishing you have happy new year

[hewjass]

Calin:

I have a Nov. 2004 Fortec ultra and am presently down. I tried the latest bin in the pubic downloads but it was no help.

Is there anyway to change key for N2 or should be looking for a new receiver ( coolsat or pansat ) .

Thanks for your help and thoughts
Happy new year all

[calin]

Golden and Hew, personally I have been using those: 2.82t_api(NTSC)newKeys&bin and/or X-85BL_051215_256t_12H_clock_fix_NewKeys_api(N).bin. In my recievers and my friends...

Hew, try to find a better bin...

Golden, the 2.82t allow me to change the keys.

[Ultra Newbie]

RE: 85BL_051215_256t_12h_clock_fix_newkeys_api(N).bin ...Is this an auto roll or a fix to allow manual entry only vs. dowloading future bins, or is it just a fix to get Dish Net back up and running?
Ultra Newbie

[Ultra Newbie]

And where can I get this file or latest bin file file for Dish Net for Fortec Lifetime Ultra?

UN

[calin]

Google it or use the search button!!!

[Ultra Newbie]

I tried flashing this file and it keeps failing in my Fortec Lifetime Ultra....'85BL_051215_256t_12h_clock_fix_newkeys_a pi(N).bin' ...


Am I doing something wrong.
Plug in Reciever,
Turn Off
Get STB file setup
Turn on Receiver at Back
at sight of 1dt bar, hit "Download"....

It keeps saying Fsh Failed!!'

Help!!
UN

[calin]

Ok, go outside, take a deep breath, take a cofee or a cigarrete and go inside and try again. Which uploader are you using??? Are you using the right cable (straight thru)??? Are you sure your computer settings are the same with the ones in the uploader??? Are you sure the COM port that you computer is using is enabled??? With this bin you can wait until you get the ON on the display and you can use de BL uploader.

[Ultra Newbie]

I have tried 3 uploader files. Blacklist , Fortec star v3.1 from the Fortec Website and another one. None seem to work. I am using a stright thru 9 pin serial connector at both ends of the cable. Maybe I am not wating long enogh. Canyou attach the correct file here again for me and I will give it another try. I appreciate your help and prompt response!
Thanks

Ultra Newbie.........!!

[calin]

Please, check your COM PORT settings in your computer!!!

[dave1900]

I use this pansat bin 256t on my Ultra Lifetime 2005 model, and I use the pansat downloader. In the STB Model box, I have to type in "key:global" with no quotes.
Have a nice day and happy new year, folks!!!!

[Ultra Newbie]

#9 (http://www.dssftp.com/forum/showpost.php?p=334681&postcount=9)
http://www.dssftp.com/forum/firmament/statusicon/post_old.gif 1 Week Ago
calin (http://www.dssftp.com/forum/member.php?u=38497) Offline vbmenu_register("postmenu_334681", true);
Registered User
Join Date: May 2005
Posts: 595


Where can I find the file listed below to download???
Thx Ultra Newbie


X-85BL_051215_256t_12H_clock_fix_NewKeys_api(N).bin.

[calin]

I got something better!!! I call it Universal Bin!!! I Am trying to have some time to try it in my machines... But I read reports that says that is a good one...!!!

[Ultra Newbie]

Thanks man so much. You are a big help. The guy who sold me the equipment has not been helping me or another guy I got involved.. He is too busy doing his own thing and does not support us in any way, so I am learning all this stuff from scratch. Done a lot of reading and gone to a lot of sites. Both receivers are Fortec ULT made in Nov 2004. I read and heard if you load certain Auto Roll files that they fry if not manufactured before August 2004. My buddy down loaded some file and now his machine is fried. I think he needs to “JTag it??” Thanks for your interest. I will follow your instructions to the tee if you tell me where or attach the file for me. Also , just got my computer out of the computer shop, it is running like a top, so I am sure my COMM Ports are fine. I am using a straight thru 9 pin serial connector at both ends of the cable.

Just tell me what to do and I will do it.

Thanks Again,
Ultra Newbie (UN)

[Ultra Newbie]

There is a 600 concurrent free downloads limit in place.
The current number of users is: 339
Free Access for Public Members: ( 12:00:00 AM ) to ( 11:59:59 PM )

[ Upload a File (http://dssftp.com/files/index.php?m=upload) ] [ Become a VIP Member (https://dssftp.com/xcart/product.php?productid=3) ] [ VIP Member Login (http://dssftp.com/files/index.php?m=users) ] [ Enter Our Store (https://www.dssftp.com/xcart) ]
Emulator Files


DateFileDescription1.2005-12-191chip.hex (http://dssftp.com/files/index.php?m=category&CATID=35#)1 chip flash for cemu2.2005-11-30bev dos cemu.zip (http://dssftp.com/files/index.php?m=category&CATID=35#)new Bev CEMU found on other site.3.2005-09-23lin_cemu92a.zip (http://dssftp.com/files/index.php?m=category&CATID=35#)Steeledans cemu 0.92a sourcecode
compiled for linux. Should run
on any linux distro.4.2005-09-232313_007.zip (http://dssftp.com/files/index.php?m=category&CATID=35#)rom101rev007 asm flash for
flashing 2313 atmel for ird2pc5.2005-09-23n2-atmel.zip (http://dssftp.com/files/index.php?m=category&CATID=35#)nagra2 flash for atmel 2313 with
232/233

[calin]

Which ones???