JKeys wrong info????

[conflict]

I'm not getting the correct info for my IRD...JTag info is aight. This is what I get
Ird# R -0 0000 00001 -86
Box Keys FF FF FF FF FF FF FF FF
Build Config yyyy
MOdel ID yyy
Boot Strap yyyy
SOftware yyyyy

I'm using 3100 (310-10) Receiver with JKeys version 2.0.1 (build 008)

I have been trying and trying to fix my sat but no luck. I want it to be fixed by tmrrw. Any help?

[conflict]

anyone :confused:

[fibrechunk]

What ird are you using and what jkeys version are you using? With out knowing that nobody can help.

[conflict]

310-10 (3100 new)
JKeys 2.01 (build 008)

[fibrechunk]

jkeys 2.9.9.016 should work alot better. There are different jkeys for different irds. You should be able to find it in the file section.

[conflict]

jkeys 2.9.9.016 should work alot better. There are different jkeys for different irds. You should be able to find it in the file section. thanks but can u provide me with the direct link?

[smilingjack]

use 2.9.11.026 in the public files

[conflict]

use 2.9.11.026 in the public files

problem solved :D new problem:(

error "Please insert card Correctly"
019

[smilingjack]

What kind of card ?

[conflict]

What kind of card ?

atmega 128

[smilingjack]

Did you mod your new tsop ?
did you put the new keys in your card ?

[conflict]

Did you mod your new tsop ?
did you put the new keys in your card ?
I have modded my new tsops but I'm not sure if I done them correctly or not. Anywayz I do not know how to put new keys in my card. I'm using JeepersDX if it helps

[smilingjack]

find one that is already modded
hex editor opens the fike to edit it

[conflict]

find one that is already modded
hex editor opens the fike to edit it

thanks for replying.... Where can I find one which is alrdy modded to use with 3100 (newer version)

soorry kind of newbie at this

[ruciz]

Yeah 019 is wrong combo for keys with the mod and atmega flash. Get pre-fabbed files from the file section and modify the TSOP for your build config (best if you don't have to change it at all) write them to the IRD and then boot the IRD and turn off the auto-update so charlie don't try to sneak one in on you in the downtime. Grab latest keys and edit your zip and fully monty the card. attach the sat signal and atmega and you should be up and running - make sure you do a switch check if you are using a new TSOP or it might not see your dishes.

Edit the TSOP Bin with flashedit 2.4, edit the EEPROM with a hex editor or WIEM32.

[conflict]

Yeah 019 is wrong combo for keys with the mod and atmega flash. Get pre-fabbed files from the file section and modify the TSOP for your build config (best if you don't have to change it at all) write them to the IRD and then boot the IRD and turn off the auto-update so charlie don't try to sneak one in on you in the downtime. Grab latest keys and edit your zip and fully monty the card. attach the sat signal and atmega and you should be up and running - make sure you do a switch check if you are using a new TSOP or it might not see your dishes.

Edit the TSOP Bin with flashedit 2.4, edit the EEPROM with a hex editor or WIEM32.

I'm having trouble finding modded files any direct link to the file section?

[conflict]

my receiver is 3100 (newer version) running DshNetwrk NOT BELL

[conflict]

just found my needed files ofr my receiver

plz hold !

[conflict]

im done modding tsops and putting them on receiver (IRD) how shud I program atmega 128 card??? NOW IM USING BELL VU