need help with 119 annd 110 on 20"bell dish

[HILLBILLY]

little lost. i have a 20"bell that has the bracket for 2 lnb's. i got the skew, elevation, azimuth. set it. now here is where it gets weird. i am getting the 119 on the lnb that should be getting 110. looking at the dish, its getting the signal from the left side lnb. i triple checked the mast to see if it was level, tried it all, just really confused. any ideas?

[joshmab]

Looking at the dish you should move it to the right and up a little. Have the screen so you can see it or someone to let you know when your close. Then tweak it in to the best signal you can get.

[HILLBILLY]

Looking at the dish you should move it to the right and up a little. Have the screen so you can see it or someone to let you know when your close. Then tweak it in to the best signal you can get.
so to be clear, looking at the dish, 119 is on the right and 110 is on the left, is that correct? i only ask cause if i move it to the right, i will move both out of range, cause like i said, i am getting 119 on the 110 lnb, if i am looking at it correctly.

[joshmab]

Your looking at it right the the settings they give you are to get you in the area. Ive never seen them right on. keep the signal meter on 110 and move it till you get 110. You only heve to move it an inch or two to the right and up.