KISS(keep it simple stupid) can I get some simple help for ROM 102

[baggerbob]

I have just recieved ROM 102 and wanted to know if I can use me Atmega cable to program it? I used to used it before N2 but on atmega card.

Also: I have 2 3100-010's One is up and running with bev card. I also have an old one which I used when things were good before Nagra2 and it has not been updated. I would like to know how to do this please. As want to use ROM 102 etc for the old receiver. Have dl'd files and things I need but it says "must have updated firmware"
Can I take card from working one and put in old one and try and let it update?
HELP!!!!!! a newbie I have 2 3100-010's One is up and running with bev card. I also have an old one which I used when things were good before Nagra2 and it has not been updated. I would like to know how to do this please. As want to use ROM 102 etc for the old receiver. Have dl'd files and things I need but it says "must have updated firmware"
Can I take card from working one and put in old one and try and let it update?
HELP!!!!!! a newbie :confused:

And want to thank BirdieMod for the following infomation:

Rom 102 needs to be glitched to unlock first with a modded loader, Unless you bought one already opened like Mili's for example.
You will need a ISO loader to load the rom 102 then which is a different device that the unlocker altogether, not merely a cable to do all this stuff. If the card is virgin unmarried you can use it to update your receiver firmware, Otherwise you will likely need to reflash the ird tsop mem. Your need to anyway to mod the tsop to get it going so if you don't have one get a jtag device as well.

But this is Greek to me.

__________________
Dish keys 1/21/06 3 PM- Reverified 1/25/06 11 AM
.
IKEY 0= 9E5B7A77C0FE91CA4D2ADC33D4CDE375 - active
IKEY 1= FBD9F2D9D6C9EF7A57AD322467426CE6

I don't know anything about all this and have searched so many files my eyes are crossed.
All I am asking for is in simple layman's terms the answer to my question.
What the heck is an ISO loader etc.
I know there are a lot of ppl out there that would really like the NON TECH llanguage and information about how to program etc.
I am sorry if I have offended anyone but I really want to get things going

[Pyotr]

I saw your other post and thought the question was answered.
No.An atmega cable is not useful for anything but atmega.
You need two different pieces of hardware to be able to use a 102 card.
1st, a modified loader(glitcher) and a program that opens and installs a backdoor on the card.
Then,you need an ISO loader and another program to read and write to the card.
For the rest,all the info is here. Just a click away.And do try using the search feature.
Sorry,but a complete answer to your questions would just take too long,especially when it's all here.Have fun learning.I did/am.

Just wanted to add.There are newbie guides for everything you need. There's other websites that can be a big help too. One is xxx.maestra.tv (replace xx's with w's). Another is xxx.kickinchicken.org