anybody else blackscreen?

[Mars]

Is anybody else experiencing a blackscreen or just me? I don't see any other thread about it, do I have the wrong keys?:

;ADD THE NEW KEY HERE...ThERE ARE 2 KEYS
;
; Idea Key 86: KEY 0
$D863=FBD9F2D9D6C9EF7A57AD322467426CE6

; Idea Key 96: KEY 1
$D873=9E5B7A77C0FE91CA4D2ADC33D4CDE375

If not, can someone please post the ones that are working right now please?

[Dtech]

301 ??? Mine took software upgrade. You have to reflash tsop back to P243 mine went to P244 because I forgot to set menu to ask before taking upgrade, my fault . Get the Jtag out!!
Dtech

[BirdieMod]

Blackscreen causes.
Wrong boxkeys
Blacklisted ird number
Wrong public keys
Wrong firmware version
Make sure the tsop file and card etc file are compatible as they vary.

[BirdieMod]

Look at your keys, I just noticed you have your key 0 and key 1 reversed.

[Mars]

I reversed the keys but still no luck, yeah i have a 301.10. I noticed that on the Guide, there is now a red "TV Guide" logo. I'll probably have to reflash the tsop, thanks for the tip, I'll try that.

[muleman]

If there red guide your tiers need to be updated

[boricua]

needto erase flash 1 full then program flash 1 whith u22 301/10.13.eb-eaea- 10-u p244 bin then erase flash 2 full then program flash whith u 23 301/10.13 then make shore that you eprom is olready at p244 if not flash eprom whith eprom at p .244. good luck ?

[BirdieMod]

Don't take the stream update either, It's doing this also.

[Mars]

i'm still using the boxkeys from the penga files. should i add my original ones? are the ones that the penga files provided blacklisted?
This is my setup:
301.10 with rom 10 converted to 102
- Using the All in one.ep10
- using the keys that were suggesed in this thread.
- my eeprom is currently flagged i.e. EAED-F appears in system info screen. I'm having trouble creating a virgin eeprom.
- i succesfully reflashed the TSOPs back to p243, using the patch method in the beta flashedit.

[jfootlog]

Both my 301's took the 244 update. I found this on another site and it got mine working ok with the new flash:

here is step by step instructions
(you need jkey to access tsop image and rewrite modiified image and
flashedit to apply script)
(this is explained for 2 tsop - 301 model - but its general for all)
1. save tsop (both flash1 and flash2) using jkey software and jtag
2. save universal scripts .fs file to same folder where you have flashedit.exe
3. Open flashedit
4. Open tsop flash1 and flash2 files and Press Open button
5. Verify the Receiver model #
6. Press Advanced button
7. Verify IRD # 0162B382 / R 00 2324 5698-16
& Boxkey 87 38 2E C5 AC CA 04 7E
8. select Fix CRC (by clicking the check box)
9. select universal fs script file apropriate for your receiver model by scrolling down the SCRIPT combobox
10. click apply script button
11. you will be prompted to save both modified tsop - save it.
12. erase flash 1 3 times the write new flash .
13. erase flash 2 3 times then write flash 2

I uploaded the file to the Echostar Files section of the public downloads. It is called DP301 dish.zip. It is in the moderation queue so I'm not sure when it will show up.

Hope this helps.

-Footlog

[Mars]

thanks for the help. I got it working again but only for a while. Milli said there were going ot be major software upgrades yeserday night. Could this be why it went down again? should i let the software update now or is it something else like the idea keys? Also, When the "active" status moves from Key1 to Key0, what does that mean and do I have to do any changes to my rom10 whenever that happens. and where can i find the latest idea keys whenever they change?