How to enter key manually on Coolsat 5000

[step592]

got the latest 1.13 firmware on Coolsat 5000. how do I enter the key manually?

[tooquik4you]

Go to channel 8282 and thats all

[tunerdude]

First turn off Bev autoroll in menu.

Then on remote enter 8282 to access the CAS Menu or key edit function.

Scroll right to the Nagravision CAS for Bev.

The N2 keys will show as 4 key lines,

10 and 11 for Idea Key 0
and
20 and 21 for Idea key 1

These are what I used. Been up an hour now.

10 - 8A 36 34 9A A4 28 3C 40
11 - 79 4B C2 C9 CF 9A 40 7B
&
20 - 35 15 AC AA 14 44 2C 19
21 - 0F E9 95 D3 54 B0 32 EA

Express Vu (0801) is on Key Tab 2 on current bin. Use the channel up and down button on the remote to scroll to different Key Line IDs and Key Lines.

Do not edit key line Ids!!
To enter the keys, use the Info button for letters A-F. Press it once for A , twice for B , etc and use the channel number key pad for numerical entries.

Or you can press OK and it will open a keyboard selection type menu to enter keys. I have found the easiest way to edit keys is to use the Ok button to open the Key Pad and use it for entering alpha characters and to enter numerical entries with the remote channel number entries. When key change is complete, Press Exit and confirm key change save.

[luckyhorse]

where is the autoroll function in the coolsat 5000??? i know its somewhere in the main menu but where??? looked and cant find it!

[RIP101]

menu - dish setup- at bottom autoroll option
turn of bev and then exit and save

[luckyhorse]

i still cant find it i have a list here that says when i hit dish settings lnb power lnb type etc please help thanks!

[BiggerBear]

The Autoroll is at the bottom of the Installation MENU
Hit MENU and look on the bottom right

[luckyhorse]

thanks you guys my problem was i had 111 installed instead of 113 all is corrected thanks again!

[luckyhorse]

these keys dont work

[step592]

You guys are great! FTA is up with the keys provided by Tunerdude. Thanks Tunerdude, good how to guide!

[luckyhorse]

i dont know if its just me but i have double checked theses keys 4 times and they dont work on my coolsat 5000 how about anyone else

[luckyhorse]

sorry folks i have corrected my problem it seems that you have to factory reset the coolsat 5000 after inputting your keys manually live and learn i guess!

[tunerdude]

this temporary fix is still working as of 8am this morning.
cheers

[BiggerBear]

Did BEV change the keys this morning? My BEV was working by turning Autoroll OFF and putting the Keys in, but it's not working anymore. I used CyberDBS to get Keys and it still shows the Keys I have already entered. I read the Pansats have a new Bin. Hope Coolsat gets a new bin out today, but I havn't read anything from the NORW Group.

[tunerdude]

There has been a key change. Enter these.

10 - 4f 77 44 a4 fa f2 ae 87
11 - ac da 5f 1a 1a 4b 89 2c
&
20 - a6 90 8a ad df bc 9e ad
21 - bb df 9e ad 9a df ac ab

[step592]

Tunerdude, I double check my input, it`s a no go for me. Where or what soft. do you use to get the keys?

[tunerdude]

I grabbed these new keys from the net. I got them working by doing a factory reset then disabling autoroll once again. Then inputing the new keys and waited 30 seconds.

[johnnieq]

First turn off Bev autoroll in menu.

Then on remote enter 8282 to access the CAS Menu or key edit function.

Scroll right to the Nagravision CAS for Bev.

The N2 keys will show as 4 key lines,

10 and 11 for Idea Key 0
and
20 and 21 for Idea key 1

These are what I used. Been up an hour now.

10 - 8A 36 34 9A A4 28 3C 40
11 - 79 4B C2 C9 CF 9A 40 7B
&
20 - 35 15 AC AA 14 44 2C 19
21 - 0F E9 95 D3 54 B0 32 EA

Express Vu (0801) is on Key Tab 2 on current bin. Use the channel up and down button on the remote to scroll to different Key Line IDs and Key Lines.

Do not edit key line Ids!!
To enter the keys, use the Info button for letters A-F. Press it once for A , twice for B , etc and use the channel number key pad for numerical entries.

Or you can press OK and it will open a keyboard selection type menu to enter keys. I have found the easiest way to edit keys is to use the Ok button to open the Key Pad and use it for entering alpha characters and to enter numerical entries with the remote channel number entries. When key change is complete, Press Exit and confirm key change save.

tunerdude - When you copy & paste someone's posting verbatim as you have, you should acknowledge the source. You got this from my ROM10X post.... johnnieq

[tunerdude]

ok next time I'll make sure to state it's a copy and paste. Or better yet I'll just wait until you get around to posting it.

[tunerdude]

For those of you looking to grab the latest keys do a search for a tool called
CyberDBS Nagra 2 Tools v1.101

Please forgive me if I am posting this in the wrong fashion, I am unaware who made this tool nor do I care, but perhaps the makers will come around and set me straight.

[step592]

Thanks tunerdude, it`s working fine now. I didn't find the CyberDBS soft yet. I will look for it further. Thanks again.

[johnnieq]

As tunerdude memtioned Key grabbers are very handy. Here are two more. These are not nearly as elaborate or multi-functional as CyberDBS's Nagra Tools, but if keys are all you need, they do fine...

Key Ripper v2.0 - Simple to install & use, hit button, get latest keys.

It is a dssevolution file but I think you have be a paying member to get it there. A Google search may find it elsewhere.

Another one is Keys! v 1.0.15 & you can find it at hxxx://newbigals.com/dishprogs.htm (http://newbigals.com/dishprogs.htm) Not a live link :) but you know where