301.10 good connect "X" Polarization

[rave93]

Hi again,

another 301.10 receiver which has the prob,
that the check switch is "OK", it finds the LNB
with a good connection, but NO SIGNAL ...
and polarization indicates "X" (no go :cool: )
the tr31 switches 14/18Volts, so do they get to the
LNB... where does the signal get lost :rolleyes: ?

Well looking at it another time, I read now
some 30 / 50 Volts output to the LNB ... as well
as on the te31. That looks like a reason to me - and pretty much
like a hardware issue.

Easy question - Any simple fix - yeah right ...

Could that be a N2 Modded Tsop Issue
or is it hardware related ?

Another 301.10 receiver works just fine connected
to the same cable.

thanks

[BirdieMod]

No 30 to 50 volts, Your lnb switch combo would cook. 13 to 19 vdc.

Virginize the eeprom, Most likely your issue if you already checked the lnb voltage was 13-19 at the sat in connector. Go into the signal strengh screen and set it to transponder 1 and meter the dc voltage, then change it to transponder 2. It should give you 13-14.5 one way and 18 to 19.5 the other.

[BirdieMod]

Let me know where you saw 30 to 50 if it was on this site, I would like to delete that false info so others are not misinformed.

[rave93]

Hi BirdieMod, thanks for the reply ...

sorry for the confusion,
I read the 30/50VDC from my meter,
which is in working condition ;)

I'll try to virginize again ...
but did that twice.