no power light after erasing 3 x flash2 ??

[haris2k7]

no power light after erasing 3 x flash2 ??


before erasing i did made bak up copy of my flash 1 and 2 and eeprom

also when i try to go and write the bakup of flash 2 it wont let me some error pops up
help please its brand new ird costed me 125:(

[c7320]

no power light after erasing 3 x flash2 ??


before erasing i did made bak up copy of my flash 1 and 2 and eeprom

also when i try to go and write the bakup of flash 2 it wont let me some error pops up
help please its brand new ird costed me 125:(

This is happening because you closed jkeys after erAsing flash 2. Now you must use the Wall 2.0 to reserect your IRD. download the wall erase flash 2 again, Program the first 60000 bytes of flash two with your back up copy of flash 2. Unplug, plug back in. The green light should come on now. Open Jkeys erase flash 1 again but dont close it this time. Reprogram the entire flash 1 dont close jkeys! now erase flash 2 again and reprogram with your backup. Close flash programming window and see if you can read your box keys. If yes program eeprom with a virgin image

[ellsmako]

Uh silly question I guess, But what reciever ?
My 501 needs oJ1 jumped to allow a tsop number 2 write!

[haris2k7]

Ird 301 .010 is the ird
In wall which one is flash one and flash 2
1FC00000 <<<<<??? Flash 1 or 2??
1FE00000 <<<<<<<<<<??

also Set Length (Hex) to 60000. for which flash 1 or 2???

[haris2k7]

Set Length (Hex) to 60000. yes for flash 2 but which is flash 2 in wall
1FC00000 <<<<<??? Flash 1 or 2??
1FE00000 <<<<<<<<<<??

[haris2k7]

This is happening because you closed jkeys after erAsing flash 2. Now you must use the Wall 2.0 to reserect your IRD. download the wall erase flash 2 again, Program the first 60000 bytes of flash two with your back up copy of flash 2. Unplug, plug back in. The green light should come on now. Open Jkeys erase flash 1 again but dont close it this time. Reprogram the entire flash 1 dont close jkeys! now erase flash 2 again and reprogram with your backup. Close flash programming window and see if you can read your box keys. If yes program eeprom with a virgin image
still no light comes and in jkeys this is what i get

After doing that in wall and when i run jkeys by D2
in jtag info
device id 0x5400006D
Device LSI SC2000
and IRD # R-0000 00001-96
BK's FFFFFFFFFFF
build cfg yyyyy and yyyyyy other stuff
what now or what did i do wrong>?>??>>?