Rom 102 not auth

[Startac]

I have a rom 102 rev 103 i just programmed and now i get Smartcard not auth message..any ideas...

Note this is not a rom10 card...this is a rom 102 card.

[jumbo768]

I have a rom 102 rev 103 i just programmed and now i get Smartcard not auth message..any ideas...

Note this is not a rom10 card...this is a rom 102 card.

we need more history about this card.. Like what receiver ? is it married to it? if so did you add tiers and blocker? and if its not married to the receiver did you do a tsop mod?
hard to answer a question like this , unless you give more details......

[Startac]

The receiver is a 3100 and the card is a rom 102 rev 103..

How do you marry the receiver and the card? any instructions..maybe this is my problem?

[Startac]

I did a tsop mod...i just modified the bk and IRD# i am using the public bk and IRD

[jumbo768]

I did a tsop mod...i just modified the bk and IRD# i am using the public bk and IRD

follow this how to...to the letter......

Here is a quick guide for using rom102 with a 3100 for evu, with your own IRD info.
Disclaimer -
Examine patch files carefully for valid addresses.
Use at your own risk.
If you dont know what you are doing, do NOT attempt this...none of the mentioned persons in this readme shall be accountable for any looped/damaged equipment. The following steps may not be 100% accurate...some COMMON SENSE and PRIOR KNOWLEDGE is necessary. You will need a background in JKEYS, Nagraedit, Rom102 datatypes, DT08 and SK's, current bn102 and 3m's...etc.
Software and files Required:
JKEYS
Card image (*.bn102)
GenDT08 V2.2
N2Edit beta 7 (at the time of this release)
Copy of your personal TSOP with NO modifications.
Blocker (ROM102-BLOCKER-V22sk-AND BACKDOOR PASSWORD at the time of this release)
and perhaps Hexworkshop - to search through the card image and locate certain data.
============================
Part 1: Prepare rom102 card image.
In either N2Editbeta7 or a hex editing program (I ONLY USE N2EDIT, so I cant vouch for the others)...Open Card image [filename.bn102]. I used one with a 3m already on it. Clean codespace a few times.
***NOTE: No need to edit any info here. Once you open everything in GenDT08, edit it there, and the patch that is generated will change everything on the cam for you(when you apply the patch). This saves you from searching around your card for the ird#, etc.
Save the image.
============================
Part 2: Prepare TSOP bin.
Use the latest version of your tsop, without any mods. Save to HDD with jkeys2.9.9
============================
Part 3: GenDT08_SK Version 2.2
Open GenDT08_SK
Note the order of the first 2 steps. For me, if I opened TSOP bins first, then Cam image, for some reason my TSOP build config changed on the TSOP Info tab....so...
Click on [cam info] tab and CLICK ON 102 RADIO BUTTON. Load card image
Click on [TSOP info] tab select "Use Ird Secondary Key" button and load Tsop bin U22. A new space will appear to load the 2nd tsop bin. OPen U23 in that one. If "App Checksum" is RED, click "FIX" button.
CLICK ON [Cam INFO] TAB. If your CamID got zero'd out, re-enter. Enter Zip, etc, as well.
Click on "New RSA" button at the bottom. [Or "load Keys" if you want to use keys from previous session]
Click on "Calc SK" Button
Click on "Apply SK". Not sure if "checkpoint" has any bearing here. Mine didnt go red, although was FF's
Save Tsop [File > Save TSOP Image]
Click on "Save Keys" button, so you have a record of what you used.[Not required if you chose "Load Keys"]
Click on "Save Patch" button. Save the file.
Close GenDT08
===========================
Part 4: Write TSOP to IRD with JKEYs2.9.9
===========================
Part 5: Writing your rom102
Open N2Edit beta7 (or perhaps higher...beta7 was latest when this tutorial was created)
Open card image that you saved from Part 1.
OPTIONAL: Apply tiers. (Skip this step if you used a bin with tiers already)
Apply ROM102-BLOCKER-V22sk-AND BACKDOOR PASSWORD.
Apply patch from GenDT08 that you saved with "Save patch". Ensure the info in the patch is correct.
Save Card image.
Write card.

[white zombie]

Thanks for the "How To" Jumbo, I just saved it to my files. Do I need a modded loader If I get a rom102 card that is "open" from Eb**?

Zombie

[Horseman]

No just an iso ..

[white zombie]

What rev is "open" for a Rom102?

[will]

I did my owne IRD BOXKEY number and everything works fine until their is the new fix for the autoroll. I took the latest fix, open my TSOP and load the key that I save the first time in GenDT08 2.2 and save the Patch. I use Nagra7 and open the new image ( fix for the autoroll ) and aply the patch that I created with GENDT08 Program the card and I always have the error 05. I don't know if I 'm the only one
Help please.

[ronski]

YOU ARE NOT THE ONLY ONE. I FOLLOWED EVERY STEP AS STATED ABOVE ON MY 301.010 W/ ROM 102. iT BOOTS UP PERFECTLY ! The guild shows all clear. AND still all I get is a flashing Error 005 ! Where in Eeprom on a Rom 102 is the Public Keys placed??

[JT]

If you used the V22 blocker just give it a chance to roll.

[ellsmako]

Jup Jt is correct,.. as usual,... V22 has been perfect for a long while.