Fianally a fix for Unknown provider rom 102

[irish122970]

Finally this will fix your softlooped 102 unknown provider cards and password locked cards

All thanks go out to RebelSerf. Great work man.....




************************************************** ************************************
'* New VB SCRIPT CREATED BY RebelSerf - 1/31/06 *
'* *
'* FOR STREAM LOCKED, PASSWORD LOCKED or SOFT LOOPED ROM 102s. *
'* AUTOMATIC VCC, SEMI-AUTO DELAY RANGE *
'* USES ONLY NEWD13.HEX WITH LOADER *
'* THANKS TO A CERTAIN SLAVE DRIVER ;-) *
'* *
'* HAPPY UNLOCKING AND GOOD LUCK!! *
'* *
'************************************************* *************************************
Option Explicit
Dim StartDate
Dim BuffFlg
Dim bytes2
Dim IntTim
Dim RngFlg
Dim RngHi
Dim RngLo
Dim SlFlg
Dim RdLen
Dim DtPnt
Dim bytes
Dim Uflg
Dim Acnt
Dim Mix
Dim VS1
Dim VT1
Dim DS1
Dim LP1
Dim LP2
Dim RT2
Dim RT3
Dim RT7
Dim VG
Dim DD
Dim TL
Dim RT
Dim T1
Dim T2
Dim T3
Dim T4
Dim T5
Dim T6
Dim GT
RT7 = 0
LP1 = 1
BuffFlg = 0
RngFlg = 0
SlFlg = 0
Uflg = 0
VT1 = 1
DS1 = 960
DD = DS1 + 96
GT= 6
RngLo = DS1
RngHi = DD
RT = RngLo
RT3 = RT 'Do not change any values above this line
'^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^


Sub Main()

Setupunlocker()
If CheckChipVer <> 1 then
Sc.MsgBox("Flash Version ND13 needed to run this script" & VbCr & "Flash your Loader with NewD13.hex")
Exit Sub
End if
' These, AND ONLY THESE :), are the variables you can change for rom 102 any revision up to 105/241
LP1 = 40 'Number of tries per delay FROM 20-100 in multiples of 20
VS1 = 40 'YOU CAN CHANGE THIS FROM 02-255 = semi-automatic VCC range - Loader dependent
Mix = 0.5 'Glitch VCC resolution - attempts per VCC = 1/mix
'^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^^^^^^
VG = VS1
sc.verbose = 0
Sc.Write("A0") ' turn led off
Clearoutputwindow
If ChkCard() = 0 then
Sc.MsgBox(" Unsupported Rom Version: Rom " & T1 & ", Rev " & T4 & " found." & VbCr & "This Script is for use with Rom 102, Revs up to 105/241")
Exit Sub
End if
If RT7 <> 0 then
Sc.MsgBox(" Invalid or no atr. Card may be looped or an unsupported rom." & vbcr & " Unable to continue.")
exit sub
end if
Clearoutputwindow
StartDate = Now()
Print "Initial Parameters = Delay:" & HexString(RT, 4) & " VCC:" & HexString(VG, 2) & " Glitch Type:" & HexString(GT, 2)& vbcr & vbcr
Do
If BuffFlg = 0 then
Acnt = 0
Do
sc.delay(10)
Sc.Write("07 0E 03 10 01 03 9A 00") 'reset card
Sc.Read(02)
Bytes = Sc.Getbyte(1)
If Bytes > 25 then
Sc.Read(27)
Exit Do
End if
Acnt = Acnt + 1
If Acnt > 5 then
Exit Do
End If
Loop
If Acnt > 5 then
Sc.MsgBox(" Check Loader Settings. Invalid or no atr. Card may be looped." & vbcr & " Unable to continue.")
exit sub
End If
Sc.Write("B0" & HexString(VG, 2))
Sc.Delay(10)
'sc.verbose = 1 'debug the packets
Sc.write("15 03 15 600C 2100098D00EE3100A7559D9D88 0E" & HexString(IntTim, 2) & "85 00")
Sc.Read(2)
bytes = sc.getbyte(1)
sc.read(bytes)
If bytes > 5 then
bytes = sc.getbyte(3)
If bytes = 111 then
BuffFlg = 1
sc.delay(10)
Sc.write("64 03 15 60 5B 2100588ECA9D9D9D9D559D9D9D9D9D9D9D9D9D9D9D9D9D9D9D 9D9D9D9D9D9D9D71801864A64BB76BCD7C1630C0B5021864CD 7C168219B7071864CD7C163176BE08CC7A95" & HexString(DtPnt, 2) & "BFA1FF270187BC88011E050060DB82199D9DE49D9D9D88 0E01 83 00")
Sc.Read(02)
bytes = sc.getbyte(1)
Sc.read(bytes)
End If
End If
End If
If BuffFlg = 1 then
Sc.Write("A0")
Sc.Delay(20)
Sc.write("0D 03 15 6004 F4C101BC88 0E01 83 00")
Sc.Read(2)
bytes = sc.getbyte(1)
sc.read(bytes)
Sc.Write("12 03 15 6003 48C00088 0E01 83 20" & HexString(RT,4) & HexString(GT, 2) & "0E10 00")
sc.read(2)
Bytes = Sc.Getbyte(1)
Sc.Read(Bytes)
End If
Sc.write("0D 03 15 6004 F4C101BC88 0E01 83 00")
Sc.Read(2)
bytes = sc.getbyte(1)
If bytes > 3 then
sc.read(bytes)
bytes = sc.getbyte(0)
bytes2 = sc.getbyte(3)
If bytes2 = 144 then
BuffFlg = 0
UFlg = 1
End If
If bytes = 79 then
print "-"
VG = VG - mix
Else
If bytes =< 72 and RngFlg = 0 then
If bytes >= 64 then
If RngFlg < 3 then
RngFlg = RngFlg + 1
End If
RngLo = RT - 3
If RngLo < DS1 then
RngLo = DS1
End If
RngHi = RngLo + 5
RT = RngLo
End If
End If
BuffFlg = 0
Print "+" & HexString(bytes,2)
VG = VG + mix
End If
Else
PRINT " Rst" & HexString(VG, 2)
BuffFlg = 0
VG = VG + mix
sc.write("02 03 00")
sc.write("02 02 00")
End if
If BuffFlg = 0 then
Sc.Write("08 0E 03 10 01 01 03 9A 00") 'reset card
sc.read(02)
bytes = sc.getbyte(1)
sc.read(bytes)
sc.delay(16)
If SlFlg = 1 then
Sc.write("2C 03 15 6023 210020A0CA00001A041801018600AA9D9D9D9D9D9D9D9D9DAE 69CC7A9BBE000000000088 0E06" & HexString(RdLen, 2) & "00")
Sc.Read(2)
bytes = sc.getbyte(1)
If bytes > 5 then
sc.read(bytes)
bytes = sc.getbyte(0)
bytes2 = sc.getbyte(3)
If bytes = 18 and bytes2 = 132 then
sc.write("13 03 15 600A 210007A0FF0000024800330E02 85 00")
Sc.Read(2)
bytes = sc.getbyte(1)
If bytes > 5 then
sc.read(bytes)
bytes = sc.getbyte(0)
bytes2 = sc.getbyte(3)
If bytes = 18 and bytes2 = 105 then
UFlg = 1
End If
End If
End If
End if
End If
If SlFlg = 0 then
Sc.write("14 03 15 600B 210008A0CA0000020400CD88 0E06" & HexString(RdLen, 2) & "00")
Sc.Read(2)
bytes = sc.getbyte(1)
If bytes > 5 then
sc.read(bytes)
bytes = sc.getbyte(0)
bytes2 = sc.getbyte(3)
If bytes = 18 and bytes2 = 132 then
If SlFlg <> 1 then
bytes2 = sc.getbyte(5)
Uflg =1
End If
End If
End If
End If
End If
If Uflg = 1 then
Print " !!!!!!!" & VBCr
Sc.Write("A1")
Sc.delay(500)
print
print "******* Good response received! *********"& VbCr
PRINT " " & HEXSTRING(bytes2,2) & VbCr
Sc.Print "===========================================" & VbCr
print " " & HexString(bytes2, 2) & " was hit at: Delay:" & HexString(RT3, 4) & " VCC:" & HexString(VG, 2) & " GlitchType:" & HexString(GT, 2) &VBCr
print " Elapsed: " & TimeDiff(StartDate,Now())& vbcr
Print " VCC Resolution: " & mix & vbcr
Print " Delay Range: " & HexString(RngLo, 4) & " to " & HexString(RngHi, 4) & VBCr
print
SC.DELAY(700)
If Rdlen = 135 then
PRINT "********************************" & VBCR
PRINT "* 102 CAM NOW OPEN!! *" & VBCR
PRINT "* PROCEED AS NORMAL *" & VBCR
PRINT "* GOOD LUCK! :-) *" & VBCR
PRINT "********************************" & VBCR
Else
PRINT "********************************" & VBCR
PRINT "* 102 CAM REVIVED!!! *" & VBCR
PRINT "* READ THE CARD *" & VBCR
PRINT "* CLEAN CODESPACE AND *" & VBCR
PRINT "* WRITE CLEANED BIN TO CARD *" & VBCR
PRINT "* GOOD LUCK! :-) *" & VBCR
PRINT "********************************" & VBCR
End If
exit sub
End If
If VG < VT1 then
VG = VS1
End if
If VG > VS1 then
If VG >= 254 then
VG = VS1 / 2
End If
End If
If VG + mix = 0 or VG + 1 = 0 then
VG = VS1
End if
GT = GT - 3
If GT < 6 then
GT = 9
End If
LP2 = LP2 + 1
If LP2 > LP1 / mix then
ClearOutputWindow
RT = RT + 1
RT3 = RT
BuffFlg = 0
LP2 = 0
print
print "" &vbcr
print "Buffer Intercept Installed. Trying to Open the 102.... Delay:" & HexString(RT, 4) & " VCC:" & HexString(VG, 2) & " Glitch Type:" & HexString(GT, 2) & VBCr & vbcr
sc.print "Elapsed = " & TimeDiff(StartDate,Now())& vbcr & vbcr
If RT >= RngHi and RngFlg > 0 then
RT = RngLo
RngFlg = RngFlg + 1
If RngFlg >= 3 then
RngFlg = 0
RngLo = DS1
RngHi = DD
End If
End If
If RT > 1056 then
DS1 = 864
DD = DS1 + 96
RngLo = DS1
RngHi = DD
RT = RngLo
End If
If RT = 960 then
DS1 = 960
DD = DS1 + 96
RngLo = DS1
RngHi = DD
RT = RngLo
End If
End If
Loop
End Sub

Function HexString(Number,Length)
Dim RetVal
Dim CurLen
RetVal=Hex(Number)
CurLen=Len(RetVal)
If CurLen<Length Then
RetVal=String(Length-CurLen,"0") & RetVal
End If
HexString=RetVal
End Function

Function CheckChipVer()
CheckChipVer = 1
sc.write("90")
delay(80)
If sc.read(4) <> 4 then
CheckChipVer = 0
Exit Function
End if
If getbyte(0) <> &H4E then CheckChipVer = 0
If getbyte(1) <> &H44 then CheckChipVer = 0
If getbyte(2) <> &H31 then CheckChipVer = 0
If getbyte(3) <> &H33 then CheckChipVer = 0

End Function

Function TimeDiff (StartTime, EndTime)
Dim Hours, Minutes, Seconds
Seconds = DateDiff("s", StartTime, EndTime)
If Seconds > 90000 Then Seconds = 90000
If Seconds < 0 Then Seconds = 0
Minutes = Seconds / 60
Minutes = Fix(Minutes)
Seconds = Seconds - (Minutes * 60)
Hours = Minutes / 60
Hours = Fix(Hours)
Minutes = Minutes - (Hours * 60)
Seconds = CStr(Seconds)
Minutes = CStr(Minutes)
Hours = CStr(Hours)
If Len(Seconds) = 1 Then Seconds = "0" + Seconds
If Len(Minutes) = 1 Then Minutes = "0" + Minutes
If Len(Hours) = 1 Then Hours = "0" + Hours
TimeDiff = Hours & ":" & Minutes & ":" & Seconds
End Function

Function ChkCard()
ChkCard = 1
Print ""
Print " Determining type of Unlock needed ......." & VBCr
sc.delay(2000)
ClearOutputWindow
Sc.Write("08 0E 03 10 01 01 03 9A 00") 'reset card
sc.read(02)
bytes = sc.getbyte(1)
If bytes = 0 or bytes < 27 or bytes > 27 then
RT7 = 1
ClearOutputWindow
Exit function
End If
sc.read(bytes)
sc.delay(16)
T1 = chr(sc.getbyte(16))
T2 = chr(sc.getbyte(17))
T3 = chr(sc.getbyte(18))
T4 = chr(sc.getbyte(23))
T5 = chr(sc.getbyte(24))
T6 = chr(sc.getbyte(25))
T1 = T1+T2+T3
T4 = T4+T5+T6
If asc(T4) = 0 then
T4 = "000"
End If
If left(T4, 1) = "2" then
DtPnt = 156
Else
DtPnt = 167
End If
If T1 <> "102" then
ChkCard = 0
exit function
End If
If T1 = "102" and T4 = "106" or T4 = "242" then
ChkCard = 0
exit function
End If
Print " Rom " & T1 & ", Rev " & T4 & " found." & VBCR
print
Sc.delay(1500)
Sc.write("14 03 15 600B 210008A0CA0000020400CD88 0E08 86 00")
Sc.Read(2)
bytes = sc.getbyte(1)
If bytes < 6 then
RdLen = 133
IntTim = 48
print " Proceeding with Really Fooked Unlocking :-D......"
Sc.Delay(2000)
exit function
end If
if bytes > 5 then
sc.read(bytes)
bytes = sc.getbyte(0)
bytes2 = sc.getbyte(3)
If bytes = 18 and bytes2 = 132 then
RdLen = 133
IntTim = 21
SlFlg = 1
print " Proceeding with Normal Unlocking......"
Sc.Delay(2000)
exit function
Else
RdLen = 131
IntTim = 48
print " Proceeding with Fubared Unlocking :-)......"
Sc.Delay(2000)
end If
End If
End Function

Function setupunlocker()
Wx.BaudRate = 115200
Wx.ResetBaudRate = 115200
Wx.Parity = 0 ' 0 = None, 1 = Odd, 2 = Even, 3 = Mark, 4 = Space
Wx.StopBits = 0 ' 0 = 1 stop bit, 1 = 1.5 stop bits, 2 = 2 stop bits
Wx.DTRControl = 0 ' Initial state of DTR 0 = off, 1 = on
Wx.RTSControl = 1 ' Initial state of RTS 0 = off, 1 = on
Wx.ResetDelay = 100 ' In microseconds
Wx.ByteDelay = 10 ' In microseconds
Wx.RxByteTimeout = 500 ' In milliseconds
Wx.ResetMode = 2 ' 0 = No Resets, 1 = ISO Reset (Expect a ATR), 2 = Device Reset (No ATR)
Wx.ResetLine = 1 ' 0 = Toggle RTS for Reset, 1 = Toggle DTR for Reset
Wx.ByteConvention = 1 ' 0 = Inverse, 1 = Direct
Wx.FlushEchoByte = 0 ' 0 = no flush, 1 = flush - A Phoenix interface will echo each byte transmitted.
Wx.FlushBeforeWrite = 1 ' 0 = no flush, 1 = flush - Flush the receive buffer before each write to strip off Null bytes.
Wx.IgnoreTimeouts = 1 ' 0 = Abort script on a receive timeout, 1 = Ignore all receive timeouts
Wx.ResetAfterTimeout = 0 ' 0 = Don't reset after a timeout, 1 = do a reset after a timeout - Not used if "IgnoreTimeouts=0"
Wx.LogTransactions = 0 ' 0 = Don't log transactions, 1 = log transactions
Wx.DisplayUSW = 0 ' Display USW after script complete 0 = no, 1 = yes
Wx.DisplayFuse = 0 ' Display Fuse after script complete 0 = no, 1 = yes
End function

[Crazy1_79]

Is this program legit?

[woods]

crazy dont know if that one in particular is but there is a program called rebalsurf omni unlocker that does just that. unsoftloops rom102 that are provider unknown. works great used many times

woods

[Crazy1_79]

Well I got the other version of this script that was floating around the forum, I looped one of my providers unknown and it fixed the other one, so I guess that is a victory

[gooding]

I got 2 no provider cams back useing Rebelserf and Rebelserf with comments .worked great !:D

[scabby]

looped 2 of mine none fixed

[Crazy1_79]

I looped one out of two, so I'm 50/50 with it. sorry for your loss though, that must suck.

[aubu]

Is there a similar script for Rom10to102. I have one siting at 102/Rev103 with 'Error, unsupported card type'. This script came back saying it's fixed but it did not. Have tried many passwords, BD0 is blank. No D2c, Patch und0, Mrom, Viagra, Romstudio, CAmwisler etc have worked.